| SiC对不锈钢的摩擦磨损特性 |
| |
| 引用本文： | 田晓,林彬,杨飞,何婧,韩建华.SiC对不锈钢的摩擦磨损特性[J].河北大学学报(自然科学版),2006,26(2):157-160. |
| |
| 作者姓名： | 田晓 林彬 杨飞 何婧 韩建华 |
| |
| 作者单位： | 河北大学,质量技术监督学院,河北,保定,071000;天津大学,先进陶瓷与加工技术教育部重点实验室,天津,300072 |
| |
| 摘 要： | 在室温、无润滑的条件下,利用销盘式摩擦磨损实验考察了SiC与不锈钢(1Cr18Ni9Ti)组成摩擦副的摩擦磨损特性,SiC在5 N和20 N载荷作用下磨损机制为脆性分层磨损.SiC随载荷增加摩擦系数减少,但磨损率随载荷增加而增加.结果表明,SiC与不锈钢对磨时,磨损率达10-4mm3/(N.m)-1数量级,属磨损剧烈,不适合组成摩擦副.
|
| 关 键 词： | 摩擦 磨损 陶瓷 摩擦副 |
| 文章编号： | 1000-1565(2006)02-0157-04 |
| 修稿时间： | 2005年1月6日 |
Friction and Wear Properties of SiC Against 1Cr18Ni9Ti Friction Couple |
| |
| TIAN Xiao,LIN Bin,YANG Fei,HE Jing,HAN Jian-hua.Friction and Wear Properties of SiC Against 1Cr18Ni9Ti Friction Couple[J].Journal of Hebei University (Natural Science Edition),2006,26(2):157-160. |
| |
| Authors: | TIAN Xiao LIN Bin YANG Fei HE Jing HAN Jian-hua |
| |
| Abstract: | Friction and wear properties of SiC against stainless steel(1Cr18Ni9Ti) friction couples were studied under room temperature and unlubrication by pin-disc tribometer.The test shows that friction and wear of SiC against stainless(1Cr18Ni9Ti) friction couple likes layer cutting away.With load increased,friction coefficient decreases,wear rate increases.The result expresses,friction and wear of SiC against stainless steel(1Cr18Ni9Ti) is flake Formation.SiC against stainless steel(1Cr18Ni9Ti) couple doesn't adapt to use for friction couple. |
| |
| Keywords: | friction wear ceramic friction couple |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
