组合曲面加工无干涉刀具路径的产生 |
| |
引用本文: | 涂海宁,熊壮,喻道远,段正澄. 组合曲面加工无干涉刀具路径的产生[J]. 华中科技大学学报(自然科学版), 1996, 0(9) |
| |
作者姓名: | 涂海宁 熊壮 喻道远 段正澄 |
| |
基金项目: | 国家“863”CIMS应用工厂项目. |
| |
摘 要: | 根据过渡曲面的特性及目前加工方法的缺陷提出了采用成形刀沿纵向加工等半径圆弧过渡曲面的新方法,并给出了刀具轨迹及干涉检查的算法.此方法大大提高了加工精度和效率.
|
关 键 词: | CAM;NC编程;NC加工;空间自由曲面;成形刀 |
An Algorithm for Machining Spatial Transitional Surfaces of Equal Radii with Forming Cutters in the Longitudinal Direction |
| |
Abstract: | The NC machining of blends in large quantities of parts with complicated mold surfaces is always a difficult job. Currently, spherical cutters are usually used in such cases by reciprocating movement in the transverse direction. According to the features of blends, a new way to machine arc shaped blends of equal radii with forming cutters in the longitudinal direction is proposed. The method of constructing a rolling ball for the blends and some basic concepts are described and the method of calculating the keel line and the critical line of the blends are derived. Algorithms for determining the tool path in the longitudinal direction for both convex and concave blends are given. The interference occurring in the machining of convex ones with forming cutters is discussed. In accordance with different principles of interference occurrence, the interfrence is divided into two categories, the arc length interference in the transverse direction and the curvature interference in the longitudinal direction. Measures to avoid such interference are suggested. |
| |
Keywords: | CAM NC programming NC machining free form surface forming cutter |
|
|