|
|||||
|
|
| SiC颗粒粒径和相对密度对泡沫SiCp/ZL104复合材料压缩性能的影响 | |
| 引用本文： | 罗彦茹,于思荣,朱先勇,刘家安. SiC颗粒粒径和相对密度对泡沫SiCp/ZL104复合材料压缩性能的影响[J]. 中南大学学报(自然科学版), 2011, 42(6) |
| 作者姓名： | 罗彦茹 于思荣 朱先勇 刘家安 |
| 作者单位： | 1. 吉林大学机械科学与工程学院,吉林长春,130022 2. 中国石油大学机电工程学院,山东青岛,266555 3. 吉林大学材料科学与工程学,吉林长春,130022 |
| 基金项目： | 吉林省科技发展计划项目 |
| 摘 要： | 采用CaCO3作为发泡剂用熔体发泡法制备泡沫SiC/ZL104复合材料，用CMT5205电子万能试验机对该材料压缩性能进行测试，并分析泡沫SiCn/ZL104复合材料在外力作用下的破坏机理及SiC颗粒粒径和相对密度对该材料压缩性能的影响规律。研究结果表明：泡沫SiCp/ZL104复合材料受轴向压缩时由于孔壁发生弯曲和横向拉伸而呈脆性逐层破坏或沿斜截面断裂的特征；当SiC颗粒粒径由28 μm减小到5 μm时，泡沫5％SiCp/ZL104(体积分数)复合材料的屈服应力由5 MPa增至11MPa;当其相对密度由0.16增至0.32时，对应的屈服应力由5 MPa增至10MPa。 |
| 关 键 词： | 金属基复合材料 泡沫金属 破坏机理 SiC颗粒 相对密度 |
Effects of SiC particle size and relative density on compressive properties of SiCp/ZL104 composite foams |
|
| LUO Yan-ru,YU Si-rong,ZHU Xian-yong,LIU Jia-an. Effects of SiC particle size and relative density on compressive properties of SiCp/ZL104 composite foams[J]. Journal of Central South University:Science and Technology, 2011, 42(6) | |
| Authors: | LUO Yan-ru YU Si-rong ZHU Xian-yong LIU Jia-an |
| Affiliation: | LUO Yan-ru1,YU Si-rong2,ZHU Xian-yong1,LIU Jia-an3 (1.Institute of Mechanical Science and Engineering,Jilin University,Changchun 130022,China,2.College of Mechanical and Electrical Engineering,China University of Petroleum,Qingdao 266555,3.Institute of Material Science and Engineering,China) |
| Abstract: | The SiCp/ZL104 composite foams were fabricated by the melt foaming process using CaCO3 as blowing agent.The compressive properties were tested by CMT5205 electron universal testing machine.The failure mechanism and the effects of SiC particle size and relative density on compressive properties of SiCp/ZL104 composite foams were investigated under loading condition.The results show that,under axial compression,the failure mechanism of SiCp/ZL104 composite foams display brittle crack characteristics layer by ... |
| Keywords: | metal matrix composite metal foams failure mechanism SiC particle relative density |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |