| 排刷式结构的专用疲劳试验机研制 |
| |
| 引用本文： | 王小纯,王勇,李尚平,苏文桂.排刷式结构的专用疲劳试验机研制[J].广西大学学报(自然科学版),2009,34(4). |
| |
| 作者姓名： | 王小纯 王勇 李尚平 苏文桂 |
| |
| 作者单位： | 1. 广西大学机械工程学院,广西,南宁,530004
2. 钦州学院,广西,钦州,535000 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 针对甘蔗剥叶元件在工作时具有非线性、大变形的特点,易产生根部疲劳断裂的现象,而现有的疲劳试验机无法模拟其工况,为获得剥叶元件真实的S-N曲线,以排刷结构的剥叶元件为试验对象,设计排刷式结构的专用疲劳试验机.在保证应用条件的基础上,以经济性、可靠性、便捷性为设计指导思想,以性价比高的台钻为试验机架,用八角环测力仪测量,虚拟仪器采集和处理信号,辅以自制的转轴和自行设计的控制电路,便完成了试验机的设计工作,经调试后的试验机运行证明完全符合设计要求.通过对剥叶元件在该试验机的大量试验,获得了真实的S-N曲线以及疲劳断裂失效的机理,在此基础上进行的优化设计,从根本上消除了剥叶元件根部易断裂的现象.优化后的剥叶元件平均寿命从原来的24 h提高到现在的800 h,从而保证了剥叶机整机性能的可靠性,也填补了排刷式结构的专用疲劳试验机空白.
|
| 关 键 词： | 剥叶元件 排刷结构 S-N曲线 可靠性 疲劳试验机 |
Study on fatigue tester for brush component |
| |
| WANG Xiao-chun,WANG Yong,LI Shang-ping,SU Wen-gui.Study on fatigue tester for brush component[J].Journal of Guangxi University(Natural Science Edition),2009,34(4). |
| |
| Authors: | WANG Xiao-chun WANG Yong LI Shang-ping SU Wen-gui |
| |
| Institution: | 1.College of Mechanical Engineering;Guangxi University;Nanning 530004;China;2.Qinzhou College;Qinzhou535000;China |
| |
| Abstract: | Cleaning brush component of sugarcane cleaner behaves in nonlinear large deformation during working and it is easy cause fatigue damage at its root.There is no available ready-made tester to evaluate fatigue property of brush component.In this work,a tester was developed for testing fatigue property of cleaning component,a bench drill was used as its frame,the testing load was measured by an octagonal ring dynamometer,testing signals were acquired and processed by virtual instrument and the turning shaft an... |
| |
| Keywords: | cleaning component brush shape S-N curve reliability fatigue tester |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
