| 压握过程对球囊扩张支架性能的影响 |
| |
| 引用本文： | 王明,马全超,张文光,罗云.压握过程对球囊扩张支架性能的影响[J].上海交通大学学报,2012,46(4):646-650. |
| |
| 作者姓名： | 王明 马全超 张文光 罗云 |
| |
| 作者单位： | (上海交通大学 机械与动力工程学院，机械系统与振动国家重点实验室, 上海 200240) |
| |
| 基金项目： | 国家自然科学基金资助项目(30970704) |
| |
| 摘 要： | 压握过程中支架发生塑性变形及加工硬化现象将对支架的后续变形行为产生影响.研究利用有限元方法模拟了支架的完整变形过程，评价了扩张后支架的各项性能，并与未考虑压握过程的模拟结果进行了比较.结果表明，压握过程不仅会导致扩张后支架的形状发生变化，同时会使回弹率和最大应力增大，支架最大可扩张直径变小.
|
| 关 键 词： | 压握 加工硬化 球囊扩张支架 |
| 收稿时间： | 2011-08-05 |
Influence of Crimping on the Performances of Balloon Expandable Stents |
| |
| WANG Ming,MA Quan-chao,ZHANG Wen-guang,LUO Yun.Influence of Crimping on the Performances of Balloon Expandable Stents[J].Journal of Shanghai Jiaotong University,2012,46(4):646-650. |
| |
| Authors: | WANG Ming MA Quan-chao ZHANG Wen-guang LUO Yun |
| |
| Institution: | (School of Mechanical Engineering, State Key Lab. of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai 200240, China) |
| |
| Abstract: | Plastic deformation and work hardening may occur in crimping, which can result in changes of material properties and affect the performance of stents. A complete deformation procedure of a typical stent was simulated using finite element method. Its mechanical performances were evaluated and compared with that using a simplified procedure (omitting the process of stent crimping). It was found that the crimping has a significant influence on the stent shape, stress distribution, recoil rate and the maximum expandable diameter of stent. |
| |
| Keywords: | crimping work hardening balloon expandable stent |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海交通大学学报》浏览原始摘要信息 |
| 点击此处可从《上海交通大学学报》下载免费的PDF全文 |
