|
|||||
|
|
| 重熔工艺对油田抽油泵柱塞涂层性能的影响 | |
| 引用本文： | 张富邦,胡春莲,陈生圣,陈学定,杜世荣.重熔工艺对油田抽油泵柱塞涂层性能的影响[J].兰州理工大学学报,2004,30(3):20-22. |
| 作者姓名： | 张富邦 胡春莲 陈生圣 陈学定 杜世荣 |
| 作者单位： | 1. 兰州理工大学,合金粉末厂,甘肃,兰州,730050 2. 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050 3. 玉门石油管理局机械厂,甘肃,兰州,735000 |
| 摘 要： | 对Ni60A自熔性合金粉末在氧乙炔重熔和中频感应重熔制得的涂层,分别进行了金相组织分析、表面硬度测试及腐蚀、磨粒磨损对比的试验.试验研究结果表明,中频感应重熔涂层中的晶粒细密,表面硬度值高;涂层的耐腐蚀性和抗磨性能优于晶粒较粗大的氧乙炔火焰重熔涂层. |
| 关 键 词： | 合金粉末 重熔工艺 腐蚀 磨损 硬度 |
| 文章编号： | 1000-5889(2004)03-0020-03 |
| 修稿时间： | 2003年7月4日 |
Influence of remelting processing on coating performance of plungers in petroleum pumps |
|
| ZHANG Fu-bang,HU Chun-lian,CHEN Sheng-sheng CHEN Xue-ding,DU Shi-rong.Influence of remelting processing on coating performance of plungers in petroleum pumps[J].Journal of Lanzhou University of Technology,2004,30(3):20-22. | |
| Authors: | ZHANG Fu-bang HU Chun-lian CHEN Sheng-sheng CHEN Xue-ding DU Shi-rong |
| Institution: | ZHANG Fu-bang~1,HU Chun-lian~1,CHEN Sheng-sheng~1 CHEN Xue-ding~2,DU Shi-rong~3 |
| Abstract: | Comparison experiment on the coatings produced out of self-fluxing alloy powder Ni60A with oxygen-ethine and mid-frequency inductive remelting is conducted in connection with the metallographical analysis of microstructure, test on surface hardness, and corrosive abrasive wear, respectively. Compared to the remelted coating with oxygen-ethine technique, the coating with mid-frequency induction can produce a coating with finer crystalline grains, higher hardened surface, and better performance of anti-corrosion and anti. |
| Keywords: | alloy powder remelting processing corrosion abrasion hardness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |