| 反应注射成型聚氨酯／乙烯基酯树脂互穿聚合物网络的形态及力学性能──添加工业接枝聚醚多元醇 |
| |
| 引用本文： | 黄学成,胡春圃,陈永林,王得宁,应圣康. 反应注射成型聚氨酯／乙烯基酯树脂互穿聚合物网络的形态及力学性能──添加工业接枝聚醚多元醇[J]. 华东理工大学学报(自然科学版), 1994, 0(5) |
| |
| 作者姓名： | 黄学成 胡春圃 陈永林 王得宁 应圣康 |
| |
| 作者单位： | 华东理工大学材料科学研究所 |
| |
| 摘 要： | 将不同比例的聚环氧丙烷三元醇和工业生产的接枝聚环氧丙烷三元醇混合，与甲苯二异氰酸酯（ＴＤＩ）或碳二亚胺改性二苯基甲烷二异氰酸酯（Ｌ－ＭＤＩ）快速反应，合成了两类聚氨酯／乙烯基酯树脂互穿聚合物网络（ＩＰＮ）。用扫描电镜观察了它们的拉仲断面以及经ＤＳＣ的测定，结果表明，添加少量工业接枝聚醚多元醇，由ＴＤＩ合成的ＩＰＮ，其两个网络间的相容性有较显著的改善，显示出好的拉仲性能。然而，Ｌ－ＭＤＩ合成的ＩＰＮ，随工业接枝聚醚多元醇的加入，网络间的相容性变差，拉伸性能有所下降。
|
| 关 键 词： | 聚氨酯；互穿聚合物网络；反应注射成型；聚醚多元醇；接枝聚醚多元醇；乙烯基酯树脂 |
Morphology and Mechanical Property of Reactive Injection Molding Polyurethane and Vinyl Ester Resin Interpenetrating Polymer Networks Containing Industrial Graft Polyol |
| |
| Huang Xuecheng,Hu Chunpu,Chen Yonglin,Wang Dening and Ying Shenkang. Morphology and Mechanical Property of Reactive Injection Molding Polyurethane and Vinyl Ester Resin Interpenetrating Polymer Networks Containing Industrial Graft Polyol[J]. Journal of East China University of Science and Technology, 1994, 0(5) |
| |
| Authors: | Huang Xuecheng Hu Chunpu Chen Yonglin Wang Dening Ying Shenkang |
| |
| Abstract: | Two kinds of polyurethane(PU)and vinyl ester resin(VER)interpenetrating polymer network(IPN)containing some industrial graft polyol were synthesized by using toluene diisocynate(TDI)or uretonimine modified pure 4,4'-diphenyl methane diisocynate (MDI)respectively. The observation of electron scanning microscopy and the measurements of DSC show that,for IPNs prepared with TDI,the compatibility between the PU and VER networks is improved so much by adding less amount of such a graft polyol that it exhibits the best tensile strength over all IPNs studied here.Howevcr the IPNs synthesized with MDI but including graft polyol,the compatibility between the two networks is poor,and they all reveal poor strength. |
| |
| Keywords: | polyurethane interpenetrating polymer work reactive injection molding polyol graft polyol vinyl ester resin |
| 本文献已被 CNKI 等数据库收录！ |
