首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超声测量数据计算物质冷压线的一种解析方法
引用本文:张婷,毕延,赵敏光.超声测量数据计算物质冷压线的一种解析方法[J].四川师范大学学报(自然科学版),2006,29(3):303-307.
作者姓名:张婷  毕延  赵敏光
作者单位:1. 中国工程物理研究院,流体物理研究所,冲击波与爆轰物理实验室,四川,绵阳,621900;四川师范大学,固体物理研究所,四川,成都,610066
2. 中国工程物理研究院,流体物理研究所,冲击波与爆轰物理实验室,四川,绵阳,621900
3. 四川师范大学,固体物理研究所,四川,成都,610066
基金项目:中国物理研究院预研项目
摘    要:提出了一个利用超声测量数据来计算冷压线的一种解析方法.该方法对冷能和冷压的描述先不考虑原子之间的相互作用势的具体形式,而是直接从Murnaghan、Birch—Murnaghall、Vinet等不同解析形式的等温物态方程出发,利用室温较低压力下的超声测量数据计算零压体积模量KT0及其对压力的一阶偏导数K'T0,将其修正到0K而得到冷压线,并用静高压等温压缩数据检验各种解析物态方程模型的适用性.利用超声测量数据计算了Al、Cu、Ag3种金属的冷压线,并用DAC原位测量的300K等温压缩数据对该计算进行了比较.

关 键 词:超声测量数据  冷压线  等温状态方程
文章编号:1001-8395(2006)03-0303-05
收稿时间:2004-02-16
修稿时间:2004年2月16日

An Analytical Method for Calculating Cold Pressure Line of Materials by Ultrasonic Data
ZHANG Ting,BI Yan,ZHAO Min-guang.An Analytical Method for Calculating Cold Pressure Line of Materials by Ultrasonic Data[J].Journal of Sichuan Normal University(Natural Science),2006,29(3):303-307.
Authors:ZHANG Ting  BI Yan  ZHAO Min-guang
Abstract:.In this paper,an analytical method is proposed to calculate the cold pressure line of materials by using the ultrasonic data,which is not relative to the interaction potential of atoms for the time being.The bulk modulus K_(T_0) and its first partial derivative K'_(T_0) to pressure can be obtained from Murnaghan,Birch-Murnaghan,Vinet isothermal equations of state.K_(T_0)and K'_(T_0) are revised to 0 K to get the cold pressure line,and the isothermal compressed data are used to test the applicability of these equations of state.Using this method,the cold pressure lines of three materials,including Al,Cu,Ag,are calculated,and the results are compared with 300 K DAC data.
Keywords:Ultrasonic data  Cold pressure line  Isothermal equation of state
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号