首页 | 本学科首页   官方微博 | 高级检索  
     检索      

冷却速度对锻造TiAl基合金组织演变的影响
引用本文:唐建成,黄伯云,王健农,贺跃辉,谢鲲.冷却速度对锻造TiAl基合金组织演变的影响[J].中南大学学报(自然科学版),1999(2).
作者姓名:唐建成  黄伯云  王健农  贺跃辉  谢鲲
作者单位:中南工业大学粉末冶金国家重点实验室
基金项目:国家“八六三”高技术计划,国家自然科学基金,霍英东教育基金
摘    要:利用光学显微镜,研究了冷却速度对锻造Ti48Al2Cr(原子数分数,%)组织演变的影响.结果表明:冷却速度主要影响锻造TiAl基合金组织演变产物的形貌,而对晶团尺寸的影响较小.锻造TiAl基合金在α相转变温度θα以上等温热处理后,采用炉冷、空冷、油冷和水冷,会依次转变为全层状组织、层状组织加魏氏体组织、块状转变组织加魏氏体组织、块状转变组织加羽毛状组织

关 键 词:TiAl基合金  冷却速度  组织演变

EFFECT OF COOLING RATE ON THE MICROSTRUCTURE EVOLUTION OF A FORGED TiAl BASED ALLOY
Tang Jiancheng,Huang Baiyun,Wang Jiannong,He Yuehui,Xie Kun.EFFECT OF COOLING RATE ON THE MICROSTRUCTURE EVOLUTION OF A FORGED TiAl BASED ALLOY[J].Journal of Central South University:Science and Technology,1999(2).
Authors:Tang Jiancheng  Huang Baiyun  Wang Jiannong  He Yuehui  Xie Kun
Abstract:The effect of cooling rate on the microstructure evolution of a forged TiAl based alloy was investigated through optical microscope. The results show that cooling rate affected the morphology of the microstructure of a forged TiAl based alloy, but had little influence on the colony size. When the alloys, that were isothermally heat treated at temperatures above the alpha transus , were cooled in furnace, air, oil and water, the following products were observed respectively: fully lamellar structure, lamellar structure and widmanstatten structure, massive transformation structure and widmanstatten structure, massive transformation structure and feathery structure.
Keywords:TiAl based alloy  cooling rate  microstructure evolution
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号