| 工艺温度对超临界CO2发泡PMMA微孔结构的影响 |
| |
| 引用本文： | 何亚东,信春玲,李庆春,王珊.工艺温度对超临界CO2发泡PMMA微孔结构的影响[J].北京化工大学学报(自然科学版),2009,36(2):38-42. |
| |
| 作者姓名： | 何亚东 信春玲 李庆春 王珊 |
| |
| 作者单位： | 北京化工大学,机电工程学院,北京,100029;北京化工大学,机电工程学院,北京,100029;北京化工大学,机电工程学院,北京,100029;北京化工大学,机电工程学院,北京,100029 |
| |
| 基金项目： | 北京市科技新星计划，北京市服装材料研究开发与评价重点实验室开放基金 |
| |
| 摘 要： | 以超临界CO2为发泡剂，采用升温法和降压法制备PMMA微孔发泡材料，重点考察了发泡温度对所得PMMA微孔结构的影响。研究结果表明：对于升温法，随发泡温度升高，泡孔密度先增大后减小，这是高温下泡孔破裂合并的结果；对于降压法，随发泡温度升高，泡孔密度减小，泡孔尺寸增大，这与CO2在PMMA中的溶解度随温度升高而降低相关。
|
| 关 键 词： | 发泡温度 微孔 泡孔密度 泡孔尺寸 |
| 收稿时间： | 2008-04-15 |
Effect of foaming temperatures on the microcellular structure of PMMA |
| |
| HE YaDong,XIN ChunLing,LI QingChun,WANG Shan.Effect of foaming temperatures on the microcellular structure of PMMA[J].Journal of Beijing University of Chemical Technology,2009,36(2):38-42. |
| |
| Authors: | HE YaDong XIN ChunLing LI QingChun WANG Shan |
| |
| Institution: | College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029, China |
| |
| Abstract: | PMMA microcellular materials were obtained by using an elevated temperature method and a decompression method with supercritical CO2 as the foaming agent.The effect of varying foaming temperatures on the microcellular structure was thoroughly investigated.The results showed that using the elevated temperature method the cell density first increased and then decreased with increasing foaming temperature,due to cell coalescence.In contrast,using the decompression method,the cell density decreased and cell dia... |
| |
| Keywords: | foaming temperature microcellular structure cell density cell size |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《北京化工大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《北京化工大学学报(自然科学版)》下载免费的PDF全文 |
