| 基于ANSYS的外摆线链轮的模态分析 |
| |
| 引用本文： | 杜冰,洪林,李小娟,葛韵洁.基于ANSYS的外摆线链轮的模态分析[J].天津理工大学学报,2013(5):40-44. |
| |
| 作者姓名： | 杜冰 洪林 李小娟 葛韵洁 |
| |
| 作者单位： | [1]天津理工大学机械工程学院,天津300384 [2]天津商业大学机械工程学院,天津300134 [3]北方导航控制技术服务有限公司,北京100176 |
| |
| 基金项目： | 天津市应用基础与前沿技术研究计划（13JCZDJC34100）. |
| |
| 摘 要： | 为了提高链轮工作的可靠性,应避免链轮在传动系统中发生共振.根据链轮外摆线齿廓的形成原理,通过圆族包络法,得到实际链轮齿廓方程.然后利用Pro/E建立链轮的三维模型,并导入ANSYS软件对链轮模型进行模态分析,确定了摆线链轮固有频率和振型,从而避免链轮在传动过程中发生共振现象,同时为链轮的进一步优化设计提供技术参考.
|
| 关 键 词： | 外摆线 链轮 模态分析 |
Modal analysis of epicycloidal sprocket based on ANSYS |
| |
| DU Bing,HONG Lin,LI Xiao-juan,GE Yun-jie.Modal analysis of epicycloidal sprocket based on ANSYS[J].Journal of Tianjin University of Technology,2013(5):40-44. |
| |
| Authors: | DU Bing HONG Lin LI Xiao-juan GE Yun-jie |
| |
| Institution: | 1. School of Mechanical Engineering, Tianjin University of Technology, Tianjin 300384, China; 2. School of Mechanical Engineering, Tianjin University of Commerce, Tianjin 300134, China; 3. North Navigation Control Technology Co. ,Ltd, Beijing 100176, China) |
| |
| Abstract: | In order to enhance the reliability of sprocket, the sprocket should avoid resonance in the transmission system. According to the forming principle of sprocket epicycloidal profile , the actual sprocket tooth profile equation was obtained with the circle envelope method. Then using Pro/E to establish three - dimensional model of sprocket, and inducting the ANSYS software sprocket model for modal analysis. It was carried to determine the epicycloidal sprocket＇s natural frequencies and mode shapes to avoid resonance during the transmission process. At the same time , it also provides technique reference for further optimization design of the sprocket. |
| |
| Keywords: | epicycloid sprocket modal analysis |
| 本文献已被 维普 等数据库收录！ |
|
