| 真空钎焊不锈钢接头重熔温度的研究 |
| |
| 引用本文： | 陈建民.真空钎焊不锈钢接头重熔温度的研究[J].中国石油大学学报(自然科学版),1999,23(4). |
| |
| 作者姓名： | 陈建民 |
| |
| 作者单位： | 石油大学石油工程系,山东东营257062 |
| |
| 基金项目： | 中国石油天然气集团公司创新基金 |
| |
| 摘 要： | 利用金相试验和差热分析方法，系统地研究了用镍基钎料钎焊１Ｃｒ１８Ｎｉ９Ｔｉ时钎缝的重熔温度随钎焊工艺变化的规律。研究结果表明，熔化钎料与母材间的相互扩散是影响钎缝重熔温度的主要因素。当通过扩散使钎缝组织变成纯固溶体时，钎缝的重熔温度将大幅度提高。ＢＮｉ１ａ、ＢＮｉ２和ＢＮｉ５钎缝的重熔温度可分别提高到１２３５℃，１２３０℃和１３９７℃。ＢＮｉ７钎缝的重熔温度提高幅度较小，在试验条件下仅提高到９４５℃
|
| 关 键 词： | 钎焊 不锈钢 接头，真空 钎缝 重熔化温度 |
INVESTIGATION ON THE REMELTING THMPERATURE OF STAINLESS STEEL JOINT BRAZED IN VACUUM |
| |
| Chen Jianmin.INVESTIGATION ON THE REMELTING THMPERATURE OF STAINLESS STEEL JOINT BRAZED IN VACUUM[J].Journal of China University of Petroleum,1999,23(4). |
| |
| Authors: | Chen Jianmin |
| |
| Institution: | Dongying: 257062 |
| |
| Abstract: | The remelting temperature of 1Cr18Ni9Ti stainless steel joint brazed with the
nickelbase filling metals is investigated by the use of both the microstructure analysis and
the differential thermal analysis. The diffusion between the melted filling metal and the
stainless steel is the main factor that affects the remelting temperature of the joint. When the
microstructure of the brazing seam is in the form of pure solid solution, there is a big increase
in remelting temperature of the brazing seam. The remelting temperature of joint brazed with
BNi\|1a filling metal may be raised to 1 235 . The remelting temperature for BNi\|2 may be
raised to 1 230 . The remelting temperature for BNi\|5 may be raised to 1*8]397 , and for
BNi\|7 it may be raised to 945 .\= |
| |
| Keywords: | stainless steel joint vacuum brazing seam remelting temperature\= |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
