| 光整加工旋涡流场的计算机仿真与实验研究 |
| |
| 引用本文： | 贾月梅,张香红,赵秋霞,杨胜强.光整加工旋涡流场的计算机仿真与实验研究[J].太原理工大学学报,2005,36(6):729-731. |
| |
| 作者姓名： | 贾月梅 张香红 赵秋霞 杨胜强 |
| |
| 作者单位： | 1. 太原理工大学,文理学院,山西,太原,030024
2. 太原理工大学,机械工程学院,山西,太原,030024 |
| |
| 基金项目： | 国家自然科学基金资助项目(59875063) |
| |
| 摘 要： | 通过对旋涡气流场的计算机仿真并将其结果与实验测试结果进行对比得出了变化趋势较一致的结论。并取旋涡头分别是三个切向入口,四个切向入口的结构进行了不同介质(气、水)的计算机仿真。为实验的进一步研究发展提供了可靠的理论依据。
|
| 关 键 词： | 旋涡流光整加工 计算机仿真 旋涡头 |
| 文章编号： | 1007-9432（2005）06-0729-03 |
| 收稿时间： | 2005-07-18 |
| 修稿时间： | 2005年7月18日 |
The Computer Simulations and Experiment Studies on Swirling Flow Finishing |
| |
| JIA Yue-mei,ZHANG Xiang-hong,ZHAO Qiu-xia,YANG Sheng-qiang.The Computer Simulations and Experiment Studies on Swirling Flow Finishing[J].Journal of Taiyuan University of Technology,2005,36(6):729-731. |
| |
| Authors: | JIA Yue-mei ZHANG Xiang-hong ZHAO Qiu-xia YANG Sheng-qiang |
| |
| Institution: | 1. College of Science of TUT, Taiyuan 030024, China ; 2. College of Mechanical Engineering of TUT, Taiyuan 030024, China |
| |
| Abstract: | Through the pressure fig,comparing the results between computer simulations and experiment studies,the results showed that they were in good agreement.The computer simulates among three tangential inlets and four tangential inlets in different medium(air,water) were conducted.All we have studied is as the basis for the next step. |
| |
| Keywords: | swirling flow finishing computer simulation swirling flow head |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
