首页 | 本学科首页   官方微博 | 高级检索  
     

铁路车辆/轨道耦合系统在冲击载荷作用下的动应力分析
引用本文:李志强,赵隆茂. 铁路车辆/轨道耦合系统在冲击载荷作用下的动应力分析[J]. 太原理工大学学报, 2005, 36(6): 713-715
作者姓名:李志强  赵隆茂
作者单位:太原理工大学,应用力学研究所,山西,太原,030024
摘    要:采用有限元方法,对我国C61型运煤货车,按照车辆/轨道系统的实际结构和边界条件建立了包括车辆和轨道系统在内的有限元模型,应用大型非线性动力分析程序LS-DYNA3D模拟车辆通过轨道错牙接头时的轮/轨系统冲击载荷,然后进一步计算侧向架和钢轨在冲击载荷作用下的动应力。计算结果表明,车轮和轨道之间的动态接触力大约是静轮载的2倍,与现场试验结果基本吻合;侧向架和钢轨在冲击过程中的应力和变形比较大。

关 键 词:车辆/轨道耦合系统  冲击载荷  有限元法  动应力  LS-DYNA3D
文章编号:1007-9432(2005)06-0713-03
收稿时间:2005-08-12
修稿时间:2005-08-12

The Analysis of Dynamic Stress on the Vehicle and Track Coupling System Under Impact Loading
LI Zhi-Qiang,ZHAO Long-Mao. The Analysis of Dynamic Stress on the Vehicle and Track Coupling System Under Impact Loading[J]. Journal of Taiyuan University of Technology, 2005, 36(6): 713-715
Authors:LI Zhi-Qiang  ZHAO Long-Mao
Affiliation:Institute of Applied Mechanics, Taiyuan University of Technology, Taiyuan 030024,China
Abstract:In this paper,the full-size finite element model of wheel/track system for C_(61) wagon was established according to the real running environment.Firstly,the dynamic impact loading of wheel/track system at a rail joint was analyzed using the nonlinear dynamic analysis code LS-DYNA3D.Then,the dynamic stress on side frame and track was given based on established finite element model.It is shown the impact loading between wheel and rail is about two times of static wheel load,which is approximately consistent with experimental one.The deformation and stress on side frame and track are larger under impact loading.
Keywords:vehicle/track coupling system  impact loading  finite element method  dynamic stress  LS-DYNA3D
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号