首页 | 本学科首页   官方微博 | 高级检索  
     

无磨料低温抛光中的振动分析及消除
引用本文:刘向阳,郁鼎文,王立江. 无磨料低温抛光中的振动分析及消除[J]. 清华大学学报(自然科学版), 2005, 45(8): 1048-1050
作者姓名:刘向阳  郁鼎文  王立江
作者单位:清华大学,精密仪器与机械学系,北京,100084;吉林大学,机械科学与工程学院,长春,130022;清华大学,精密仪器与机械学系,北京,100084;吉林大学,机械科学与工程学院,长春,130022
基金项目:国家自然科学基金资助项目(59975043)
摘    要:针对无磨料低温抛光中冰盘会出现倾斜、引起加工过程的振动问题,对冰盘与工件盘的水平面内的相对运动进行了分析。对冰盘倾斜时,工件盘的纵向运动进行了建模,得到了冰盘与工件盘的偏心及冰盘的倾角越大,振动的幅值越大的影响规律,提出了抛光前对冰盘进行修整来消除振动的解决方案。通过对石英晶体的抛光实验,证实了这种方法的可行性,最终达到了粗糙度为0.53nm的超光滑表面。

关 键 词:玻璃表面抛光  无磨料  振动
文章编号:1000-0054(2005)08-1048-03
修稿时间:2004-09-13

Vibration analysis and elimination for cryogenic polishing without abrasives
Liu Xiangyang,YU Dingwen,Wang Lijiang. Vibration analysis and elimination for cryogenic polishing without abrasives[J]. Journal of Tsinghua University(Science and Technology), 2005, 45(8): 1048-1050
Authors:Liu Xiangyang  YU Dingwen  Wang Lijiang
Affiliation:LIU Xiangyang~
Abstract:The slope of the ice disk surface used for cryogenic polishing without abrasives results in vibrations during the polishing. The vibrations were studying by analyzing the relative horizontal motion between the ice disk and the workpiece to model the workpiece longitudinal motion. The results show that the vibration increases as the slope and the offset between the ice disk and the workpiece increase. Therefore, the ice disk must be modified before polishing to decrease or even eliminate the vibration. Experiments on a quart crystal created a supersmooth surface with 0.53 nm roughness.
Keywords:glass surface polishing  non-abrasive  vibration
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号