| 中厚板轧制过程头部弯曲成因分析及其控制 |
| |
| 引用本文： | 田勇,王国栋,赵忠,王昭东. 中厚板轧制过程头部弯曲成因分析及其控制[J]. 东北大学学报(自然科学版), 2007, 28(11): 1579-1582. DOI: - |
| |
| 作者姓名： | 田勇 王国栋 赵忠 王昭东 |
| |
| 作者单位： | 东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004;东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004;东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004;东北大学,轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004 |
| |
| 基金项目： | 国家经贸委基金资助项目(ZZ0113A040201) |
| |
| 摘 要： | 针对国内中厚板轧机普遍存在的头部弯曲问题,通过对轧制过程进行分析,得出轧件上下表面温差和上下辊辊径比对轧件头部弯曲的影响规律,建立轧件头部弯曲曲率、轧机上下辊辊径比和轧件上下表面温差之间的关系模型.利用该模型可以根据轧制参数预测轧件弯曲曲率,为现场配辊提供理论依据.提出一种采用CCD摄像机测量轧件弯曲曲率的测量方法.
|
| 关 键 词： | 中厚板 轧制过程 头部弯曲 配辊 接触弧 |
| 文章编号： | 1005-3026（2007）11-1579-04 |
| 修稿时间： | 2006-11-10 |
Causes and Control of Head Warping During Plate Rolling |
| |
| TIAN Yong,WANG Guo-dong,ZHAO Zhong,WANG Zhao-dong. Causes and Control of Head Warping During Plate Rolling[J]. Journal of Northeastern University(Natural Science), 2007, 28(11): 1579-1582. DOI: - |
| |
| Authors: | TIAN Yong WANG Guo-dong ZHAO Zhong WANG Zhao-dong |
| |
| Affiliation: | The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China |
| |
| Abstract: | Head warping is very common during plate rolling.Analyzing the plate rolling process,the problem of how the temperature difference between the top and bottom surface of a plate workpiece and the diameter ratio of upper roll to lower roll after the head warping of workpiece is investigated.A model is developed revealing the relationship between the curvature of head warping,the diameter ratio of upper roll to lower roll and temperature difference between top and bottom surfaces of workpiece.According to rolling parameters,the model can be used to predict the warping curvature,thus providing theoretically reference for proper roll matching.In addition,a measuring method is proposed for head warping curvature by CCD camera. |
| |
| Keywords: | plate rolling process head bending roll matching contact arc |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《东北大学学报(自然科学版)》下载全文 |
|
