|
|||||
|
|
| 钛板冷压成形开裂的影响因素及改进措施 | |
| 引用本文： | 沈浩,韩莹,江东明,袁迅.钛板冷压成形开裂的影响因素及改进措施[J].兰州理工大学学报,2004,30(6):49-51. |
| 作者姓名： | 沈浩 韩莹 江东明 袁迅 |
| 作者单位： | 1. 兰州理工大学,机电工程学院,甘肃,兰州,730050 2. 浙江舞台设计研究院有限公司,浙江,杭州,310053 3. 兰州石油化工机器总厂,换热设备有限责任公司,甘肃,兰州,730050 4. 兰炼机械厂,甘肃,兰州,730060 |
| 摘 要： | 针对钛板在冷压成形过程中压裂的问题,对钛板材料特性和改进前模具结构进行了试验、分析,认为压裂的根本原因是因材料塑性流动不足所致,并提出了改进模具结构和参数及冲压参数等解决问题的方法. |
| 关 键 词： | 钛板 模具 压裂 措施 |
| 文章编号： | 1000-5889(2004)06-0049-03 |
| 修稿时间： | 2004年2月14日 |
Causative factors of cracking in cold-pressed formation of titanium plates and improving measures |
|
| SHEN Hao,HAN Ying,JIANG Dong-ming,YUAN Xun.Causative factors of cracking in cold-pressed formation of titanium plates and improving measures[J].Journal of Lanzhou University of Technology,2004,30(6):49-51. | |
| Authors: | SHEN Hao HAN Ying JIANG Dong-ming YUAN Xun |
| Institution: | SHEN Hao~1,HAN Ying~2,JIANG Dong-ming~3,YUAN Xun~4 |
| Abstract: | Aimed at the problem of press-caused cracking in cold-pressed formation of titanium plates,the material properties of titanium plates and configuration of the mould to be improved are tested and analyzed.It is recognized that the basic reason of press-cause cracking is insufficiency of plastic yielding of the material.The solution methods such as improving the mould configuration punching paramuters,i.e. are proposed. |
| Keywords: | titanium plates mould press-caused cracking measures |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |