| 振动切削过程中参数选择的研究 |
| |
| 引用本文： | 李言,李云芳,薛万夫.振动切削过程中参数选择的研究[J].西安理工大学学报,1991(1). |
| |
| 作者姓名： | 李言 李云芳 薛万夫 |
| |
| 作者单位： | 陕西机械学院机械工程系，陕西机械学院机械工程系，陕西机械学院机械工程系 |
| |
| 摘 要： | 系统地研究了低频轴向振动切削过程,指出由于所加振动的影响,在切削过程中刀刃运动轨迹及切削参数都随时间发生变化。通过理论分析,建立了刀刃运动参数方程,并对切屑形成过程进行了充分的讨论,在此基础上,给出了振动切削时参数选择的原则。
|
| 关 键 词： | 振动切削 刀刃轨迹 频转比 |
The Study of Parameter Selecting in Vibrating Cutting Process |
| |
| Li Yan Li Yunfang Xue Wanfu.The Study of Parameter Selecting in Vibrating Cutting Process[J].Journal of Xi'an University of Technology,1991(1). |
| |
| Authors: | Li Yan Li Yunfang Xue Wanfu |
| |
| Institution: | Li Yan Li Yunfang Xue Wanfu |
| |
| Abstract: | This paper gives a systematic study on cutting process in low frequency axial vibrating cutting. It pointed out that due to the affect of the Vibrating exerted on the tool, the movement locus of cutting edge and parameters of cutting layer periodically change while cutting. Through theoretical analysis, the movement parameters equation of tool edge is established. At the same time the ship forming process is discussed. Based on these, the rules of parameters selecting are given. |
| |
| Keywords: | Vibrating Cutting locus of tool edge Ratio between frequency and work speed |
| 本文献已被 CNKI 等数据库收录！ |
