首页 | 本学科首页   官方微博 | 高级检索  
     检索      

微穿孔板消声器结构参数优化研究
引用本文:郝宗睿,周忠海,徐娟,惠超,孙玉婷,牟华.微穿孔板消声器结构参数优化研究[J].山东科学,2012,25(6):42-46.
作者姓名:郝宗睿  周忠海  徐娟  惠超  孙玉婷  牟华
作者单位:山东省海洋环境监测技术重点实验室,山东省科学院海洋仪器仪表研究所,山东 青岛 266001
基金项目:国家自然科学青年基金,山东省自然科学基金
摘    要:为研究消声结构参数对消声性能的影响,建立了消声器声场有限元模型,并在模型边界上施加相应的边界条件,通过计算求得不同结构参数下消声器的传递损失,以分析不同的结构参数对消声器的消声性能的影响。计算发现采用内径20 mm的微穿孔管可有效降低3~6 kHz频段内的噪声,微穿孔管的单节管长应为1/4波长的9倍,管上孔洞按正方形分布,开孔直径0.4 mm,开孔率4.8%。

关 键 词:消声器  有限元  微穿孔板  传递损失  
收稿时间:2012-09-06

Optimization of structure parameters of microperforated panel muffler
HAO Zong-rui,ZHOU Zhong-hai,XU Juan,HUI Chao,SUN Yu-ting,MU Hua.Optimization of structure parameters of microperforated panel muffler[J].Shandong Science,2012,25(6):42-46.
Authors:HAO Zong-rui  ZHOU Zhong-hai  XU Juan  HUI Chao  SUN Yu-ting  MU Hua
Institution:Shandong Provincial Key laboratory of Ocean Environmental Monitoring Technology, Institute of ; Oceanographic Instrumentation, Shandong Academy of Sciences, Qingdao 266001, China
Abstract:We construct the finite element model of the sound field of a muffler, impose the corresponding boundary conditions on the boundary of the model, and calculate the transmission loss of different structure parameters to investigate the impacts of different structure parameters on the performance of a muffler. Computational results show that the microperforated pipe of 20 mm can suppress the noise of 3 - 6 kHz. The length of single tube is nine times of quarter-wavelength and the entire tube has three-stage structure. The holes on the tube are square with diameter of 0.4 mm and opening rate of 4.8%.
Keywords:muffler  finite element method  microperforated panel  transmission loss
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《山东科学》浏览原始摘要信息
点击此处可从《山东科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号