| 大尺寸三维激光测量系统标定方法 |
| |
| 引用本文： | 郭扬,杜正春,姚振强. 大尺寸三维激光测量系统标定方法[J]. 上海交通大学学报, 2012, 46(2): 223-227 |
| |
| 作者姓名： | 郭扬 杜正春 姚振强 |
| |
| 作者单位： | (上海交通大学 a机械与动力工程学院；b机械系统与振动国家重点试验室，上海 200240) |
| |
| 基金项目： | 国家自然科学基金资助项目(50805094) |
| |
| 摘 要： | 研究了一种基于平面几何射影变换原理的三维激光测量系统标定方法. 根据测量系统中激光扫描平面的旋转特点，基于平面射影变换中直线不变的映射关系建立了标定对象表面被测点在不同参考系之间变换的约束关系，并采用封闭运动链思想定义系统参考系空间刚体变换关系，将系统标定问题转化为世界坐标系下系统内参数矩阵和外参数矩阵的求解. 通过空间变换关系得到上述2个矩阵的解，实现系统的标定. 该方法标定装置简单、速度快、稳定性好，能够满足实际工程应用中的需求.
|
| 关 键 词： | 大尺寸三维激光测量系统 有源标定 平面射影几何变换 封闭运动链 内外参数矩阵求解 |
| 收稿时间： | 2010-12-30 |
Calibration of a Large-Scale 3-D Laser Measurement System |
| |
| GUO Yang a,DU Zheng-chun a,b,YAO Zhen-qiang. Calibration of a Large-Scale 3-D Laser Measurement System[J]. Journal of Shanghai Jiaotong University, 2012, 46(2): 223-227 |
| |
| Authors: | GUO Yang a DU Zheng-chun a b YAO Zhen-qiang |
| |
| Affiliation: | (a School of Mechanical Engineering; b State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai 200240, China) |
| |
| Abstract: | The calibration method of 3-D laser scanning measurement system based on the projective geometry transformation was researched.Based on the characteristic of scanning plane and calibration target,the relationship between different coordinates of the scanning points was deduced by projective geometry theory.According to the thought of closed kinematic chain,the constraint equations were established.Hence the calibration problem can be converted into the solution of the intrinsic matrix and the extrinsic matrix of the system parameters in the global coordinate.The calibration was achieved through the above two matrices by spatial transformation.Finally,the validation was verified through the experiments.The research result lays a good foundation of the further work. |
| |
| Keywords: | 3-D laser measurement system active calibration projective geometry closed kinematic chain intrinsic and extrinsic matrices |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海交通大学学报》浏览原始摘要信息 |
|
点击此处可从《上海交通大学学报》下载全文 |
