|
|||||
|
|
| 斜压状态下回转窑托轮接触疲劳寿命预测 | |
| 引用本文： | 肖友刚,陈志刚,袁英才.斜压状态下回转窑托轮接触疲劳寿命预测[J].兰州理工大学学报,2007,33(4):165-167. |
| 作者姓名： | 肖友刚 陈志刚 袁英才 |
| 作者单位： | 1. 中南大学,轨道交通安全教育部重点实验室,湖南,长沙,410075 2. 邵阳学院,机械能源工程系,湖南,邵阳,422004 3. 北京印刷学院,机电系,北京,102600 |
| 基金项目： | 中国博士后科学基金 , 湖南省自然科学基金 |
| 摘 要： | 推导斜压状态下托轮接触应力的计算公式,建立托轮接触疲劳寿命预测模型.计算实例表明:随着支承载荷或托轮偏斜角增大,托轮的接触疲劳寿命显著减少;当托轮支承载荷大于2 500 kN,托轮偏斜角大于1.6°时,疲劳寿命极短,因此应通过调窑,将托轮的最大支承载荷控制在2 500 kN以内,托轮偏斜角控制在1.6°以内. |
| 关 键 词： | 托轮 斜压 接触应力 疲劳寿命 |
| 文章编号： | 1673-5196（2007）04-0165-03 |
| 修稿时间： | 2006-02-17 |
Prediction of contact fatigue life of rotary kiln supporting roller in condition of oblique compression |
|
| XIAO You-gang,CHEN Zhi-gang,YUAN Ying-cai.Prediction of contact fatigue life of rotary kiln supporting roller in condition of oblique compression[J].Journal of Lanzhou University of Technology,2007,33(4):165-167. | |
| Authors: | XIAO You-gang CHEN Zhi-gang YUAN Ying-cai |
| Institution: | 1. Key Laboratory of Track Traffic Safety of Ministry of Education, Central South University, Changsha 410075, China; 2. Department of Mechanical and Energy Engineering, Shaoyang University, Shangyang 422004, China; 3. Dept. of Mechanical and Electrical Engineering, Beijing Institute of Graphic Communication, Beijing 102600, China |
| Abstract: | Computation formula of contact stress of supporting roller operated in condition of oblique compression was derived and prediction model of roller's contact fatigue life was set up.It was shown by the illustrative computation that the contact fatigue life of the supporting roller remarkably decreased with increasing of supported load and roller's oblique angle.The fatigue life arrived at its minimum when the supported load was greater than 2 500 kN and the oblique angle was greater than 1.6 degrees.So,the kiln should be adjusted to make the maximal supported load on the roller be controlled within 2 500 kN and its oblique angle less than 1.6 degrees. |
| Keywords: | supporting roller oblique compression contact stress fatigue life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |