Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Research on Tracing Evaluation System in Virtual Enterprise Based on Neural Network

The tracing evaluation index system was designed to be used in virtual enterprise and established neural network trace evaluation model. As a result, it was more simple and nicer than the traditional method, so it had wider application foreground.     

广义正定矩阵的分析与应用

分析了广义正定矩阵,导出了矩阵广义正定的若干新判定准则,并以应用实例研究了其在神经网络中的应用.     

铝合金加工用刀具的使用研究（三）

当前我国各机械加工生产厂家引进国外进口设备及生产线较多，实现引进设备及生产线上刀具的国产化以降低生产成本，成为当前国内整个机械加工领域亟待解决的问题。     

催化电位法测定人发中痕量碘

采用碱灰化法消解发样,于中性溶液中离心去除杂质,在酸性溶液中以催化电位法测定发碘含量,回收率达98.6％;变异系数(CV)为8.7％;测出中碘地区一个教学班20名男学生发碘平均含量为0.93μg/g,与文献报道相近。     

电磁相分离法制备自生表层复合材料

采用电磁相分离法制备出以初生富铁相（AlSiFeMn复杂金属间化合物）为增强相，表层硬度为HB62．25，基体硬度为HB59．00的Al-11.70%Si-1.20?-1.50%Mn合金自生表层复合材料，增强相的显微硬度为HV 842。87，大小为20－80μm，该表层复合材料同基体材料相比，耐磨性提高了57．41％，所用方法工艺过程简单，成本低，为解决材料在服役环境中不同部位，不同性能的问题提供了新途径。     

微量分析系统测定微量全血中的锌、铁、钙

提出了一种用微量分析系统测定微量全血中的锌、铁、钙的分析方法 ,该系统是利用软件来记录吸光度随时间的变化率 ,即导数原子吸收值来提高原子吸收分析灵敏度的一种新技术 .该方法灵敏度高 ,检出限低 ,重视性好 ,直接用于测定微量全血中的微量元素 ,结果满意     

芦岭矿采空区煤炭自燃发火与开采技术关系的试验研究

采用了包括多点热电偶测定采空区遗煤温度、应用六氟化硫气体示踪和测定漏风压差等综合技术手段研究分析了漏风分布规律。结果发现,遗煤温度变化受漏风温度和漏风强度影响较大;停采线漏风的量及漏风时间受主要进、回风道的布置以及采掘接替安排的影响。由于采用无煤柱开采技术,三个相邻阶段的采空区之间连通,存在漏风,最后又从开采技术上提出了防火措施。