基于目标高斯分布的定位系统节点最优部署方法

针对三维空间定位系统中目标位置服从高斯先验分布假设条件下节点最优部署问题, 分析了纯方位目标定位算法中估计误差的费希尔信息矩阵, 推导出基于目标先验分布的克拉美罗界(Cramer-Rao bound, CRB)。为了解决目标位置在任意高斯分布时, 协方差矩阵为非对角阵的问题, 提出了基于三维坐标旋转的最大后验概率估计方法, 将协方差矩阵转化为对角阵以实现最小化CRB的迹, 从而得到定位系统中节点的最优部署。最后, 通过梯度下降算法对节点最优部署问题的理论推导进行仿真, 验证了该部署方法的有效性，同时仿真结果中不同节点部署方法的对比也表明了该方法可有效降低定位误差。     

基于多材质复合管柱的裸眼井壁支撑工艺及应用

已完钻超深裸眼水平井侧钻技术是经济、高效开发油藏剩余油的主要手段之一，传统的磨铣钢套管开窗侧钻技术存在下入摩阻大、磨铣耗时长导致开窗失败等问题。为此，提出了基于多材质复合管柱的超深水平井裸眼井壁支撑工艺，结合中国西北油田已完钻超深裸眼水平井井况，首先，提出了基于“铝合金+碳钢”的多材质复合管柱组合及设计方法；其次，开展了基于管柱实物屈曲实验数据的管柱临界屈曲载荷计算模型适用性评价，并优选出了适合于“铝合金+碳钢”多材质复合管柱的屈曲临界载荷计算模型；最后，研究了综合考虑管柱扭矩、摩阻、刚性、井眼条件、管柱强度及材质的多材质复合管柱下入性分析方法，并利用下入性分析软件对西北油田顺北X1井、X2井、X3井、X4井复合管柱进行了下入可行性评价。该方法在X1井和X2井得到成功应用，进一步论证了该工艺现场应用的可行性。研究成果可为超深水平井裸眼井壁支撑的复合管柱设计和下入可行性评价提供理论参考。     

数据驱动的铝基复合材料性能预测和逆向设计

采用数据驱动的方法对 SiCp(0.5CNT)/7075Al 铝基复合材料的化学成分以及制备工艺进行了分析, 针对抗拉强度和延伸率两个力学性能进行了特征重要性分析, 构建了包含 8 种机器学习算法的集成框架, 自动进行模型的参数调优和最优模型选择, 并在此基础上进行了材料逆向设计. 实验结果表明, 在 470 ${^\circ}$C 固溶 40 min, 120${^\circ}$C 时效 15 h 的热处理工艺下, SiCp(0.5CNT)/7075Al-1.0Mg 复合材料抗拉强度和延伸率的预测值为 617.48 MPa 和 2.98%, 实验值为 647.0 MPa 和 3.31%, 两项物理性能的平均绝对百分比误差(mean absolute percentage errors, MAPE)较小, 依次为 4.56% 和 9.97%. 这说明本数据驱动方法对铝基复合材料的工艺优化和性能提升有一定指导意义.     

四螺旋创新集群:研究型大学人工智能发展生态重构与路向探究——以加拿大多伦多大学为例

以人工智能为代表的知识迭代发展,促使知识生产模式发生重大转变,催生了“大学—产业—政府—公众”四螺旋动力结构的建立和研究型大学知识生产新生态重构。以多伦多大学人工智能发展为例,考察其四螺旋利益相关主体及实践。从内在机理看,4个主体在互动运作中不仅重新确定了各自角色,而且还建立了大学(知识)—产业(产品)—政府(治理)—公众(公益)的新型逻辑链条,平衡公私利益格局,把公益指向作为人工智能四螺旋运作的中心目标;从外在特征看,4个主体形成了以大学为中心的区域创新网络,并牵引其他主体形成环高校创新集群。当前,我国在人工智能发展中不断发力,已进入世界第一方阵,但仍需要在国际比较学习中不断提升自身竞争力。基于案例分析,我国研究型大学发展人工智能有必要把握4个方面:一是走进中心,塑造大学在人工智能发展中的领导地位;二是以专促通,创新研究型大学人工智能专业培养模式;三是引企入研,提升校企合作人工智能创新的转化升级;四是人本导向,突出大学在人工智能发展中的公共价值。总体来看,我国研究型大学发展人工智能不仅要面临技术上的挑战,更要面临来自治理的挑战。     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

关于检查井沉降与解决措施的研究

基于我国检查井施工中出现的不均匀沉降及相关施工问题的实际情况,针对导致上述问题出现的各方面原因进行分析,就优化设计、规范开挖及回填施工、强化检查井的砌筑等方面提出了相应解决措施.以期为我国市政管线建设中的检查井设计及施工提供借鉴.     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

地理国情普查地表覆盖内业解译的质量问题研究

地表覆盖内业解译是地理国情普查的一道重要工序。地理国情地表覆盖内业解译现存图斑平面位置精度不足、分类错误多种多样等普遍问题,问题突出典型。文中针对这些问题图文并茂、清晰明了的进行了说明,并从多方面分析问题产生的原因,提出加强对技术指标和采集原则的学习和理解,加强内业与外业的结合,充分发挥解译样本的作用等建议,以有效提高内业解译的质量。     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.