基于回转输运试验的煤散料离散元接触参数修正

为获取精确的刮板输送机离散元模拟结果，基于回转输运试验，通过响应面法对煤料的接触参数进行修正.采用Plackett-Burman试验考察接触参数对受力及堆积角的影响，发现煤-钢静摩擦系数、煤-煤摩擦系数具有显著正效应.根据爬坡试验结果，以受力及堆积角为响应值规划Box-Behnken试验，建立受力、堆积角与显著项间的二次回归多项式，以实测数据为目标值求得最佳参数:煤-钢静摩擦系数为0.401，煤-煤静摩擦系数为0.333，煤-煤滚动摩擦系数为0.041.通过不同输运条件下的回转试验验证了参数的准确性，为刮板输送机的离散元研究提供参考.     

硬线控制冷却工艺

研究了影响硬线性能的主要工艺参数，这些参数是决定线材最终产品质量的关键，并初步讨论了其影响规律。     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.     

CSDS法及其在磁悬浮支承优化设计中的应用

本文介绍了一种非线性规划问题的算法、——CSDS法,给出了其数学模型和在微机上运行的FORTRAN实用于程序,通过对磁悬浮支承定子最小重量的优化设计,说明了CSDS法是一种行之有效的优化设计算法。     

Modeling and Control of Active Suspensions for MDOF Vehicle

The conventional method for analyzing active suspension control for a vehicle is only to analyze a quarter or half car with a lower order degree-of-freedom (DOF) model, but such models do not actually model practical applications. Accurate models of a suspension control system require a multi-degree-of-freedom (MDOF) vehicle model with a detailed model of the controller. An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞controller with a linear quadratic (LQ) controller.     

Nonsynchronous Trading Model and Return Analysis

Nonsynchronous trading is one of the hot issues in financial high-frequency data processing. This paper extends the nonsynchronous trading model studied in [1] and [2] for the financial security, and considers the moment functions of the observable return series for the extended model. At last. the estimators of parameters are obtained.     

Pb-Sn-Bi三元系α相固溶体的点阵参数

应用X射线衍射法测定了Pb-Sn-Bi三元系Pb基α相固溶体的点阵参数,发现点阵间距与成分呈线性变化,对两批实验数据分别进行回归分析,得到点阵参数-浓度关系的统一解析式: α=0.49495X_(Pb)+0.47813X_(Sn)+0.50629X_(Bi)。其F检验置信度大于99.9％,残余标准差σ=6.4×10~(-5) nm,分析点阵畸变的影响因素表明尺寸效应是控制固溶体点阵行为的主要因素。     

异种钢焊接接头过渡层影响因素的研究

本文根据回归正交优化法原理,用电孤焊试验研究了异种钢焊接接头过渡层的影响因素。通过实测与计算,获得过渡层为零时,最佳匹配的焊接规范参数,为消除过渡层的有害影响探讨了新的途径。     

co—H空间上自同伦等价群的若干结果

研究有关co H 空间上的自同伦等价.当co H 空间X是1 连通的有限CW 复形时,εSP(SX)是有限生成的群.另外本文还得到εco H(X)是有限群的一个充分条件.     

新建白果沱大桥拱轴系数的确定

原白果沱大桥因当地经济的发展及下游修建水电站的影响，需拆除重建。文章就设计过程中拱轴系数的比选情况进行了说明。