Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

试论综合材质在现代陶艺中的运用

陶瓷艺术已由传统的艺术程式进入了现代艺术表现阶段.在陶瓷艺术中,材质既是一种物质材料,又是重要的艺术表现手段.文章从传统陶瓷材质的单一性到现代陶瓷材质的丰富性为前导,探索综合材质与现代陶艺结合表现的诸多可能性,为现代陶艺表现形式的多样性起到一定的促进作用.     

Application of Reaction-Bonded Silicon Carbide in Manufacturing of Spacecraft Combustion Chamber

Silicon carbide (SiC) ceramics is a good structural ceramics material, which have a lot of excellent properties such as superior high-temperature strength up to a temperature of 1 350 ℃, chemical stability, good resistance to thermal shock and high abrasion resistance. The silicon carbide ceramics material has so far been used widely for manufacturing various components such as heat exchangers, rolls, rockets combustion chamber. Sintering of ceramics structural parts have many technological method, the reac...     

用高品位高硫铝土矿生产氧化铝时的除硫新方法研究

本文研究了贵州高硫型高品位铝土矿溶出性能,考查了石灰添加量、溶出温度、苛性碱浓度和溶出时间对氧化铝溶出率的影响以及铝土矿的硫向溶液中的转化率(即硫的溶出率)的影响;还研究了用铝酸钡净化拜耳赤泥洗液的除硫条件和效果。     

A Novel Process for Synthesis of Ultrafine BaTiO3 Powders

A novel process termed low-temperature combustion-synthesis (LCS) of Ba(NO3)-TiO-C6H8O7H2O system was investigated at the initial temperature of 600℃ and ultrafine BaTiO3 powders with a particle size of 200€?350nm were prepared. It was found that the molar ratio of NO/citric acid and the homogeneity of combustion have remarkable effect on the characteristics of the powder. The reaction mechanism of LCS BaTiO3 powders was proposed on the basis of thermodynamic analysis.     

用扩展电阻法研究陶瓷微区电导性能

本文把扩展电阻法应用于陶瓷微区电导性能研究.建立了微区的定位标识系统,可精确、方便地对选定的微区进行电导性能及组分的重复测定.该方法在研究Ba(Sn_(1-x)Sb_x)O_3、ZnO及BaTiO_3半导体瓷应用中得到有意义的结果.     

混合稀土Nd2O3和CeO2对氧化镁陶瓷硬度及抗热震性能的影响

采用轻质微米级（0.5 μm）MgO粉末为原料,Nd₂O₃、CeO₂为添加剂,聚乙烯醇为黏结剂,以242 MPa压强干压成型,常压1 550 ℃下烧结并保温2 h制得MgO陶瓷,对所得试样进行硬度、抗热震性能、显微结构及物相的测定。先探究不同添加量的单一稀土对MgO陶瓷的硬度及抗热震性能的影响,得到Nd₂O₃和CeO₂的最佳添加量ω分别为3%、8%。然后探究混合稀土Nd₂O₃和CeO₂对MgO陶瓷的性能影响,结果表明混合稀土添加总量ω为3%,Nd₂O₃与CeO₂的质量比为3∶7时,氧化镁陶瓷具有最好性能,硬度值为68 HRA,抗热震次数高达19次。     

基于掺铕钨酸盐荧光强度比的非接触温度传感

为了突破传统测温技术应用的局限性,利用NaY （WO₄）₂：Eu³⁺玻璃陶瓷（glass ceramics,GC）实现了具有非接触、实时响应、自校准等优势的双模荧光强度比（luminescence intensity ratio,LIR）测温。采用高温熔融淬灭法制备出含NaY （WO₄）₂：Eu³⁺纳米晶的透明GC样品,并进行系列光谱测量和热敏性能分析。结果表明,样品中Eu³⁺的激发态能级⁵D₁和⁵D₀和基态能级⁷F₂和⁷F₀为两对独立的热耦合能级,可分别基于这两对热耦合能级实现性能优异的双模LIR温度传感。该双模LIR测温技术数据可靠、测温范围广、灵敏度高,再结合GC材料优势,是可用于光纤温度传感器的核心技术材料。     

SAG法合成钛酸铅纳米晶粒的工艺和结构研究

ＳＡＧ法合成钛酸铅纳米晶粒的工艺和结构研究李永祥刘泽吴冲若（东南大学电子工程系,南京２１００９６）ＰｂＴｉＯ３是应用广泛的铁电和光电材料之－,研究ＰｂＴｉＯ３纳米晶粒的合成技术和电学性能对基础研究和新型复合功能材料研究都有重要意义．作者曾采用Ｓｏｌ...     

SrxBa1—xTiO3陶瓷的频域介电谱

用固相反应法制备ＳｒｘＢａ１－ｘＴｉＯ３系列陶瓷．当ｘ＝０．３０时呈现显著的驰豫相变特征．在５Ｈｚ至１ＭＨｚ范围,相对介电常数的实部ε′随频率ｆ的降低而增大．１／ε′与ｌｇｆ的关系曲线呈现折曲的２段直线．高频相对介电常数的实部ε′ｈ随ｘ的增加而增大是与顺电相的增加而对应．测量点（ε′,ε″）随频率ｆ的变化分布在复平面的一条直线上．