植入式硅神经微电极的发展

 神经科学和神经工程研究需要研究大脑神经元的电活动情况，以了解大脑产生、传输和处理信息的机制。植入式神经微电极作为一种传感器件，是时间分辨率最高的神经电活动传感手段之一。介绍了国内外几种主要的植入式硅基神经微电极的结构特点、制备方法和性能特点。分析表明，未来通过不断结构优化和改性修饰，特别是在高通量的神经记录方面，通过与同样基于硅材料的电路的集成，硅神经微电极能够进一步提高生物相容性，解决大规模的电极通道体内外传输与连接问题，实现对神经元的在体大规模长时间记录。     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

奥氏体-贝氏体复相组织形态的研究

在60Si2MnA钢等温淬火工艺和性能研究的基础上,用MEF-3型金相显微镜和JEM-200CX型透射电子显微镜对等温转变产物的组织形态进行了观察研究。并用Rigku D/maxⅢB型X-射线衍射仪测定了样品的残余奥氏体体积分数。实验结果表明,奥氏体-贝氏体复相组织强韧性好的原因在于含有一定数量的残余奥氏体和变态贝氏体组织,且贝氏作为无碳化物贝氏体。     

试论综合材质在现代陶艺中的运用

陶瓷艺术已由传统的艺术程式进入了现代艺术表现阶段.在陶瓷艺术中,材质既是一种物质材料,又是重要的艺术表现手段.文章从传统陶瓷材质的单一性到现代陶瓷材质的丰富性为前导,探索综合材质与现代陶艺结合表现的诸多可能性,为现代陶艺表现形式的多样性起到一定的促进作用.     

Application of Reaction-Bonded Silicon Carbide in Manufacturing of Spacecraft Combustion Chamber

Silicon carbide (SiC) ceramics is a good structural ceramics material, which have a lot of excellent properties such as superior high-temperature strength up to a temperature of 1 350 ℃, chemical stability, good resistance to thermal shock and high abrasion resistance. The silicon carbide ceramics material has so far been used widely for manufacturing various components such as heat exchangers, rolls, rockets combustion chamber. Sintering of ceramics structural parts have many technological method, the reac...     

半导体单晶硅的离子束蚀刻实验研究

离子束蚀刻是一种有超精细加工能力的微细加工技术,广泛应用于微电子、光子技术、表面科学等领域。硅及其化合物常用来制作大规模集成电路,在其表面蚀刻出具有一定几何布图尺寸的沟槽。其深度、宽度、边壁倾角及槽底形状等直接影响器件的性能。     

激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。     

脉冲等离子体气相合成氮化硼的研究

以Ｂ２Ｏ３粉扩ＮＨ３为原料，用脉冲等离子体反应器合成ＢＮ，所得产品经Ｘ射线衍射，红外光谱分析表明，产品中除含六方氮化硼外，还含有少量立方氮化硼，生产工艺简单。