冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

矩形型钢弯曲回弹曲率半径r值的确定

文章在分析矩形型钢弯曲变形过程及应力与应变等方面的关系的基础上，推导出工件曲率半径与工件回弹后曲率半径之间的关系，从而确定了凸模半径。     

Effects of self evaluation on late ERP components

High-density event-related potentials (ERPs) were measured when participants were required to evaluate oneself, significant others (father and mother) and the most familiar public figures (Lei Feng and Jiang Qing) based on trait adjectives. There were three referential conditions and a non-referential control condition including self-evaluation (SE), significant other-evaluation (SOE), general other-evaluation (GOE), and semantic positivity-evaluation (SPE). The behavioral data showed that RTs to GOE condition were longer than the other three conditions. Scalp ERP analysis revealed that (1) SPE condition elicited a more negative N2 than SE condition, which was associated with inhibition of responses; (2) SE condition elicited a more positive P300 than SPE condition, which was an index of attention to self-relevant stimuli; (3) there was no difference on the amplitude and latency of P300 between SE and SOE conditions, which reflected that the concept of “self” included intimate others (e.g., father and mother) in Chinese culture.     

An ERP study for the degrees of the difficulty in visual search

The present study mainly probed the relationships between ERP components and the degrees of difficulty in visual search. Three experimental and one controlled conditions were randomly selected. Results showed that the P1, N1, and P2 amplitudes and latencies had no significant differences among the three experimental and one controlled conditions, and the ERP waveforms of low perceptual load of visual search were different from that of high perceptual load. These results might indicate that the latencies and amplitudes of initial P1, N1 and P2 in high and low perceptual load conditions were almost the same. The ERP waveforms of parallel search were very different from that of serial search, and the ERP waveforms of serial search were very similar. The P3 amplitudes increased as the degrees of the difficulty in visual search decreased.     

铜基合金中马氏体穿晶行为的研究

在形状记忆合金中,存在马氏体穿晶生长现象,它是热弹马氏体相变在小角晶界的行为。     

人类对地球形状认识的辩证过程

在系统讨论了人类对地球形状认识的复杂历史之后,作者认为这是一个“否定之否定”式的螺旋状上升过程,即“非球→球→非球…”的过程。在经历了5次“非球→球”的认识反复之后,目前人类已跨入对地球本身便存在着“球(?)非球”的动态变化过程的认识这个崭新的阶段。     

近终形连铸技术的发展状况

近终形连铸技术是当今冶金科技领域的一门前沿学科。本文介绍目前近终形连铸技术的发展及趋势。在世界各国的研究中，美国比较注重单辊法，日本侧重于双辊法，西欧则侧重于改进结晶器的结构和功能，开发新型铸机     

NiTi合金表面氧化对镍离子释放的影响

采用原子吸收分光光度计,分别测试经机械抛光和高温氧化后的NiTi合金样品在人体生理模拟液中镍离子的释放速度,结果表明NiTi合金表面氧化膜的形成可以有效地减少镍离子的溶出.     

消交叉极化偏置双镜天线的分析和设计

偏置双镜天线,由于其结构不对称,交叉极化较难控制。成形时,涉及到一个非线性偏微分方程组,其精确解对任何预先给定的主镜口径场分布和馈源场分布不都存在。为此,本文提出了一个处理这一问题的近似方法,不仅提高了精度,还消除了天线的交叉极化分量。按此方法所设计的一个3米天线在12GHz 时的效率(计算值)为82%。     

量子阻尼受迫谐振子的精确波函数

采用量子不变量理论,推导出受迫阻尼谐振子的精确波函数即量子态,结果表明系统会随时间演化到压缩态,并且计算了量子涨落和产生压缩的条件。