感应加热钢包炉电磁与结构优化

感应加热钢包炉是国外新发展的一种二次精炼及加热设备，具有高效、低能耗、无污染的特点，本文在感应加热钢包炉电磁与结构分析工作的基础上，用电磁场数值模拟方法对感应加热钢包炉的电磁设计和包壳结构进行优化。     

科技论文摘要的写作

科技论文摘要作为二次文献，具有举要性、示导性、贮存性、传扬性及商品性等功能，具有客观性、说明性、简练性等特征；摘要的写作要求是以精练的文字高度概括地反映论文的主题、结论及有关实质性信息。在内容在述与文字长短允许的情况下，尽可能运用报道性或报道－指示性文体；要保证摘要的独立性、自含性和完整性。     

织造过程中经纱张力计算机控制系统的研究

为了提高织机生产效率和扩大织造品种范围，提出了织造过程中经纱张力控制的目标和相适应的控制方案，研制了经纱张力计算机控制系统，达到了预期的性能指标。     

OPTIMAL SETTING-UP OF KNITTING ELEMENTS AND ITS EFFECT ON TENSION VARIATION

The dynamic yarn tension variations during knitting cycle are very difficult to control and be-come one of barriers to knitting on modern warp knitting machine.Examination of experimentaldata and theoretical analysis show that the relative position of spring rail to knitting elements suchas needle,guide as well as their displacement has noticeable effect on tension variation so that theknitting condition can be much improved by rearrangement of the knitting elements and theirmovement within a knitting cycle.     

Technical Notes ：STUDIES ON THE VALUE OF SECONDARY MARKET TO THE SUPPLY CHAIN

This paper investigates the impact of a secondary market, where retailers can buy and sell excessinventories, on the supply chain. We develop a two-period model with a single manufacturer and tworetailers. At the beginning of the first period the retailers order and receive products from themanufacturer, but at the beginning of the second period, they can trade surplus products betweenthemselves in the secondary market. We investigate the impact of the correlated dependence ofretailers' demand on both the quantity effect and the allocation effect under the secondary market.Lastly,we study potential strategies for the manufacturer to increase sales with the existence of thesecondary market.     

CAD技术在机械制图中的应用

根据山西省煤炭地质一一五勘查院CAD技术的应用实践,阐述了在机修中推广CAD技术的必要性,指出了在CAD应用中所遇到的问题及解决方法。     

经编针织运动服装的织物性能研究

从人体穿着舒适性能考虑,织物的热湿舒适性越来越成为人们重视的服用性能.本文针对功能性的针织运动服的原料选用和织物组织结构,分析其导湿性.     

水滴在撞击不同厚度水膜条件下产生的二次液滴特性

采用高速相机对水滴撞击水膜的飞溅过程进行了详细测量,分析了水滴撞击水膜的飞溅临界值、二次液滴的直径分布和二次液滴的速率等飞溅特性。结果表明,在实验参数范围内,当韦伯数增大时发生飞溅现象。此外,可以使用量纲为一参数K 来描述飞溅临界值,K=We·Oh^-0.4。当K值大于2 100时发生飞溅现象,二次液滴的量纲为一直径和二次液滴的量纲为一速率随着K值的增大而增大。水膜量纲为一厚度对二次液滴直径分布的影响不明显,但由冠状水花产生的二次液滴的平均量纲为一速率随水膜量纲为一厚度的增加而减小。     

微生物共培养产生新颖活性次生代谢产物的研究进展

微生物源天然产物是药物先导化合物的重要资源之一.近年来,利用微生物共培养产生各类天然产物的研究发展迅速.微生物共培养是一种通过模拟（微生物）栖息地/栖息环境以激活可能的沉默生物合成基因簇并进而诱导微生物产生新次生代谢物的有效方法.与菌株纯培养相比,共培养不仅增加了次级代谢产物的种类多样性,而且其生物活性及产量也得到了提高.文章就近5年来真菌与真菌、真菌与细菌、细菌与细菌等3种类型的微生物共培养研究成果进行了综述,同时简要介绍了用于分析共培养作用机制的多组学技术,并在此基础上探讨了微生物共培养相互作用机制研究的进展及挑战.综述旨在为微生物共培养的深入研究提供借鉴,并为微生物药物的开发提供新思路.     

Effect of calcium ions on the secondary structures of photosystemⅡ and its relations with photoinhibition

Calcium ions play an important role in the oxygen_evolving process of photosystem Ⅱ as demonstrated in many experiments. The changes of the secondary structures of PS Ⅱ induced by the depletion of Ca 2+ were reported. The results indicated that the removal of Ca 2+ led to the transition of α helix to turns and sheet structures. While Ca 2+ was re_added to the media, only the structures changed to turns could be recovered. The protein conformational changes of PS Ⅱ during the donor side photoinhibition induced by the depletion of Ca 2+ were also studied. This showed that the protein conformational changes differed between the control and Ca 2+ _depleted samples in a short period of illumination (within 10 min). However, the changes became similar when the illumination time was increased.