Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

玻璃器皿压机转位机构凸轮——槽轮机构的研究

论述了一种拨销回转半径可变的凸轮——槽轮机构。叙述了玻璃器皿压机转位机构的运动要求。研究了用这种机构驱动工作台间歇转动的设计方法。     

冲击压实机在商开高速公路中的试验及应用

结合商丘至开封高速公路介绍了冲击压实机的试验工艺、结果及应用.     

基于小波包能量特征的滚动轴承故障监测方法

对滚动轴承的故障特点进行分析，根据小波包变换能将信号按任意时频分辨率分解到不同频段的特性，提出了小波包能量特征的概念及算法，并给出两个仿真算例，然后将小波包能量特征与径向基函数网络相结合，提出了一种新的滚动轴承故障诊断方法，数字仿真实验证实了该方法的正确性和有效性。     

浅谈路基工程的冲击压实

就冲击压实原理、工程实例,论述了冲击压实技术具有减少路基工后沉降,具有提高路基整体强度及加固软弱地基的作用。     

浅谈土工格栅填石路堤质量控制

通过汾柳高速公路土工格栅填石路堤实体工程的实践,论述了土工格栅填石路堤具体的施工工艺及质量控制办法。     

CVC轧机的应用及技术问题分析

文章主要分析了CVC轧机的板形控制原理,应用中轴向力、磨损、轧辊热凸度及设备结构等技术问题。     

板材辊式矫直机辊数研究

本文根据弹塑性弯曲理论，应用迭代法计算了板材一次弯曲矫直时的弯曲力矩和相应的反弯曲率，计算给定方案下形成的残余曲率，给出了压下量与反弯曲率的数学表达式．对于一定的矫直精度要求，提出了上排工作辊集体倾斜调整的辊式矫直机辊数的计算方法．     

回流充气法处理中,高量含铁地下水的研究

本文介绍一种深井回流充气工艺,它兼具充氧和除铁综合性能的新型工艺形式,能改善含铁地下水的过滤性能.在此基础上提出了深井回流充气稳定期的概念,建立了深井回流充气系统中氧量的平衡关系.通过正交试验,提出了处理中、高量含铁地下水的推荐工艺流程和工艺参数.采用χ—射线衍射方法测试了井内铁泥和成熟滤料表面滤膜的成分和形态,分析了"充气"和"过滤》两过程中的除铁机理.     

Bi系高温超导带材冷压工艺优化试验

采用套管法（ＰＥＴ）制备Ｂｉ系高温超导带材,进行了冷压工艺的优化研究。试验结果表明,Ｂｉ系带材所能承受的压力有一个限值,若超过这个限值后,密度虽可提高,但晶粒破碎严重Ｊｃ值反而降低,带材优化的冷压工艺参数是８３８℃／６０ｈ＋冷压＋８３８℃／６０ｈ。第１次压力为２ＧＰａ,第２次２．５ＧＰａ;冷压压下速率为１．５×１０＾－４ｍｍ／ｓ。同时研究还表明冷压的主要作用是提高带材的致密度和晶粒取向度,最终改善