Exendin-4螺旋结构对生物活性及稳定性的影响

针对Exendin-4的螺旋结构特点, 采用去掉螺旋序列、 用3个连续Ala替换螺旋以及Gln13替换为Tyr13的方式对N端α-螺旋及C端α-螺旋进行改造, 设计出4个结构模拟物. 通过圆二光谱和荧光光谱进行结构分析, 结合模拟物生物活性实验, 分析Exendin-4螺旋结构与生物活性的关系. 结果表明：  Exendin-4的N端螺旋比C端螺旋对生物活性影响更大； 在抗二肽基肽酶（DPPⅣ酶）的稳定性实验中, C端螺旋比N端螺旋具有更好维系Exendin-4稳定性的作用； 螺旋结构中Tyr13可作为提高Exendin-4生物活性的重要优化位点.     

超高功率超短脉冲发展的现状及相关科学问题

超高功率超短脉冲激光系统在其聚焦焦点附近可以实现高达1022-24 W/cm2的峰值功率输出,为强场物理实验研究,以及实验室内模拟极端环境下的天体物理条件提供了直接的实现方案.自从国际上首次提出了建造EW激光的概念,即输出总功率达到1018 W的大型激光系统后,国际上很多国家都在设计和建造大规模的超高功率超短脉冲激光系统.本文简要介绍了国际上这种规模激光系统的发展状况,并结合国内超高功率高能超短脉冲激光的发展,对超高功率超短脉冲激光系统发展中相关技术问题进行阐述.     

Digging with ‘hands’: observations of food capture in the flying gurnard Dactylopterus volitans (Linnaeus, 1758)

ABSTRACT

Videofilms of a foraging flying gurnard (Dactylopterus volitans) were collected at Itaipu, Niterói, RJ, Brazil. Analysis revealed details of the use of anterior parts of the pectoral fins which act as digging ‘hands’ to access infaunal prey items that are subsequently captured by oral suction feeding. Each pectoral fin has two distinct sections articulated separately on the pectoral girdle. The digging ‘anterior pectoral fin’ mainly consists of segmented and flexible fin rays but has an anterior robust unsegmented ray that provides an edge to the ‘hand’, allowing penetration of the substratum. The huge ‘posterior pectoral fins’ are supported by unsegmented rays. Most digging episodes involved one ‘hand’ and consisted of 1–7 cycles of movement with frequencies 1.15–3.74 cycles s^?1. During a cycle, the ‘hand’ is moved forwards and medially above the substratum, then is twisted medially and simultaneously depressed so that the anterior unsegmented ray impacts and enters the substratum. The hand is then drawn backwards and laterally to disturb the substratum. To prevent upward pitching of the head during digging, the ‘posterior pectoral fins’ are both moved anteriorly and laterally to shift the centre of gravity forwards while the caudal and ?second dorsal fins continue to provide propulsive force.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

3维Maxwell方程局部1维多辛格式的能量恒等式

在理想导体边界条件下,对3维Maxwell方程的局部1维多辛Preissman格式的能量守恒性质进行研究.运用能量分析法推导了2个能量恒等式,这些恒等式说明了给出的格式在所定义的离散范数下是能量守恒和无条件稳定的,数值算例验证了结论的正确性.     

110kv及其以下的油浸电力变压器的优化设计

变压器的优化设计是变压器设计的核心,根据变压器自身的特征,通常采用遗传算法进行优化。本系统通过采用改进GA的父代参与竞争的最优保存遗传算法进行优化,得到了几乎必然收敛的优化效果。     

温度和机械载荷联合作用下油田超深井中硬质涂层膨胀锥与套管的屈服挤毁压强及试验验证

在充分考虑温度载荷、机械载荷、硬质涂层膨胀锥硬度、套管硬度对膨胀锥与套管之间屈服挤毁压强影响的基础上,根据分形理论和接触力学推导出膨胀锥与套管之间屈服挤毁压强的计算公式.数值分析表明:膨胀锥与套管之间的屈服挤毁压强随最终温度、分形粗糙度、线膨胀系数、硬质涂层膨胀锥布氏硬度、中间主应力系数、套管壁厚的增大而增大;当分形维数从1增大时,膨胀锥与套管之间的屈服挤毁压强随分形维数的增大而减小;当分形维数增大到接近于2时,膨胀锥与套管之间的屈服挤毁压强随分形维数的增大而增大;随拉压强度比的增大,膨胀锥与套管之间的屈服挤毁压强减小.屈服挤毁压强的计算值与试验测试值之间的相对误差为-8.9253%～-0.9901%.     

封闭式运动减肥对肥胖青少年体质健康的影响

对44名14～19岁肥胖青少年进行6周的封闭式饮食控制及运动,测定实验对象的身体形态、身体机能、身体素质和血液健康等指标.通过数理统计方法对实验所测得的数据进行分析.结果表明:肥胖青少年的脂肪量、体质量、体脂率都有明显的下降(P0.05);肺活量逐渐上升,身体素质指标(耐力、柔韧、50 m跑)与血液健康指标(血脂TC、甘油三酯TG、空腔胰岛素FINS)都呈非常明显改善(P0.01).封闭式运动减肥对青少年肥胖者体质健康具有良好的效能表现.     

利用反预报方法从截面预言近滴线丰质子核的结合能

在Origin等数据处理软件中,当实验数据较少时,自由参数的不同初始化设置会导致较大的结果差异,这为物理结果的确定带来较大不确定性.通过最小二乘法分析了345MeV/u ~(78) Kr+~9Be反应中产生的丰质子同位素的截面和结合能,并得到线性回归方程.通过回归方程,利用结合能预报部分丰质子核素的截面,以及通过实验截面对近质子滴线核素的结合能进行反预报测量.这对于近质子滴线的丰质子核素实验测量具有较好的借鉴意义.     

国家层面创新能力的评价

 综述了创新、创新监测与评价的研究进展，辨析了国家创新能力、创新型国家和科技强国的内涵特征，分析了中国创新能力在世界上的相对位置，探讨了建设科技强国的经验及启示。