“二三结合”开发模式渗流特征研究

L油田B区块开展"二三结合"实验区,"二三结合"开发模式渗流特征对区块的合理高效开发具有重要意义。为了明确其渗流特征,利用油藏数值模拟软件Eclipse建立代表意义的油藏数值模型,研究区块"二三结合"开发模式下原射孔层和补孔层的渗流特征,分析了"二三结合"开发模式下,不同开发阶段综合含水率、采出程度、井底压力、地层压力及含水饱和度的变化特征。研究表明,"二三结合"开发模式先通过水驱开发挖潜原射孔层剩余油,提高厚油层顶部剩余油的采出程度,再通过聚合物驱进一步提高开发效果,通过水驱与聚驱的综合作用,最终得到较好的开发效果。     

高速实时可见光通信技术研究及应用

 介绍了可见光通信技术的发展历史及研究现状。基于带宽拓展技术搭建了1 W荧光型LED做光源、PIN光电二极管做探测器、单路速率610 Mb/s的实时传输演示系统，该系统在传输距离为6.2 m时的误码率为3.48×10^-5。在此基础上搭建了荧光型LED为光源、PIN光电二极管做探测器的、双向100 Mb/s无线光上网演示系统。     

基于交通信号灯信息的混合动力汽车节能预测控制方法

针对传统混合动力汽车控制方法不考虑已知道路交通信号灯信息对车辆能量管理影响的问题,提出了基于交通信号灯信息的混合动力汽车节能预测控制智能优化策略。通过建立混合动力汽车系统的简化模型,并采用连续广义最小残量方法求解模型预测控制问题。运用MATLAB/Simulink进行仿真,仿真结果验证了交通信号灯信息模型的有效性,以及所设计的模型预测控制算法大幅度提高混合动力汽车的燃油经济性的能力和实时控制性能。研究结果表明所提出的控制策略可以实现车辆行驶轨迹的优化控制,显著提高了车辆的燃油经济性,并满足系统的实时最优控制要求。     

关于三网合一技术

介绍了我国现阶段并存的三网(电信网、有线电视网和计算机互联网)的特点与现状，分析了三网在融合过程中需要解决的一些不可避免的问题，以及三网合一的技术基础和促进三网合一的有利因素，提出了三网合一是现代通信和计算机网络发展的必然趋势，以及在三网融合的过程中还将有一个相互渗透交叉、相互竞争、共存发展过程的观点。     

阳离子微粒聚合物在造纸工业中的应用

采用乳剂和溶液的聚合技术制备了不同电荷密度和胶体性质的阳离子微粒聚合物(CPMP)。论文探讨了阳离子微粒聚合物在造纸工业中的应用。研究表明用阳离子或阴离子的聚合物与阳离子微粒聚合物联合使用可以改善纸张的匀度和留着率。其机理可能是由干阳离子微粒聚合物的加入产生了更有效的架桥絮聚。另外阳离子微粒聚合物也是一种良好的施胶剂，研究结果表明施胶效果与聚合物添加量．电荷密度和微粒尺寸有关。通过施胶张可以获得更好的光学和物理性能。     

各向同性介质与单轴晶体界面上e光波法线的折射

根据光的电矢量满足的边条件，对各向同性介质与单轴晶体界面上e光波法线的折射进行了具体的讨论，得到了确定e光波法线在单轴晶体中传播方向的公式，并对几种特殊情况进行了具体讨论。指出了由所得结果可以确定e光光线的行进方向。     

The Gas Sensitivity of Polypyrrole Film Fabricated by in Situ Polymerization

1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and selectivity of the response to these gases are always not satisfying.In the paper,conductive PPy film was deposited on the interdigital electrode modified by one bilayer of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate),by in-situ polymerization with FeCl3 as oxidizin...     

New Membranes Based on Polybenzimidazole for Polymer Fuel Cells

1 Results Acid-doped polybenzimidazoles[1] are particularly appealing because of high proton conductivity with no or low humidification and promising fuel cells performances. PBI, in fact, contains basic functional groups which can easily interact with strong oxo-acids, such as H3PO4 and H2SO4. The acid partially protonates the polymer and partially is freely dispersed in the polymer backbone, so allowing proton migration via Grotthuss mechanism along the anionic chains[2]. Anyway, a technological limit...     

STUDY ON POLYPYRROLE-VISCOSE CONDUCTING FIBER

The conductivity of Polypyrrole-viscose conducting fiber prepared with author's method can be shown up to as high as 2.106x10~(-2) S/cm. The main factors influencing the conductivity are the concentration of FeCl_3 used as dopant and initiator, the treatment time of viscose fiber as base material in FeCl_3 solution, temperature and polymerization time. It is found that the orientation and crystallization degree of viscose fiber keep constant before and after conducting treatment and the mechanical properties of conducting fiber is the same as that of base material. In addition, the distribution of polypyrrole in viscose fiber, and its effect on the conductivity were investigated in details by TEM.     

椭圆偏振光理论中一个问题的证明

本文从椭偏光合矢量旋转角速度Ω的表达式出发，对只有沿椭圆长、短轴方向的椭偏光合矢量间的相位差才为的难点给出了证明