FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

Mn_2O_3超微粒子的制备及其光学非线性

本文合成了表面修饰的Mn2O3，超微粒子（UFP）有机溶胶，并采用简并的四波混频（DFWM）手段研究了Mn2O3有机溶胶的三阶非线性光学特性，得到了较大的非线性极化率X3．最后讨论了Mn2O3超微粒子的三阶非线性产生机制．     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

僧帽牡蛎碱性磷酸酶功能基团的研究

采用化学修饰法研究僧帽牡蛎碱性磷酸酶活性功能基团性质.酶经0.4mmol·L-1PCMB修饰30min后活力仍然保持不变,提示巯基与酶的活力无关;用二巯基苏糖醇(DTT)对酶进行修饰,当DTT浓度达到2.5mmol·L-1时,酶活力丧失98%,表明硫 硫键与酶活力有密切的关系;以N 溴代琥珀酰亚胺(NBS)修饰酶的色氨酸残基,酶的修饰失活呈一级反应,当NBS浓度达到0.65mmol·L-1时,酶活力丧失100%,并辅以紫外吸收光谱的变化分析,表明色氨酸残基是酶催化活力所必需的;醋酸酐、马来酸酐、甲醛等氨基试剂对酶的修饰作用显示氨基是酶的必需基团.     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

钙和钡对钢脱氧及夹杂变性的理论分析

在比较了各种常用脱氧剂单质脱氧能力的基础上，对钙合金、钡合金夹杂的变性能力进行了理论分析和探讨，并对钡合金的脱氧和夹杂物变性工艺提出了建议。     

煤吸附解吸电磁改性及定量分析

用容量法对焦作朱村矿变质无烟煤在不同频率的交变电磁场中吸附解吸特征进行了研究。实验结果表明：不同频率的交变电磁场作用下，煤吸附C02、N2仍旧符合Langmiur方程；交变电磁场减弱了煤的吸附能力，减小了吸附常数b值，但饱和吸附量(a值)基本上不变．是典型的表面改性现象，并从量的角度分析其改性的程度。     

纳米氧化锌粉的表面改性研究

以Zn(NO3)2·6H2O和CO(NH2)2为原料,采用均相沉淀法制备纳米氧化锌粉.用扫描电镜对产物粒度大小、形貌进行观察,并对其影响因素进行了探讨.结果表明,在反应温度为120℃,反应时间为2.5h时,所制的纳米氧化锌的产率最大.用不同的表面改性剂对纳米ZnO进行表面改性,粉体不再发生团聚.图6,表7,参5.