Influence of Microstructure and Sintering Routes on Transport Properties of Apatite Materials for Fuel Cells

1 Results Oxy-apatite materials are thought as zirconia-substitutes in Solid Oxide Fuel Cells due to their fast ionic conduction. However, the well known difficulties related to their densification prevent them from being used as such. This study presents strategies to obtain oxy-apatite dense materials and the influence of elaboration route on transport properties. Particular emphasis is put on the microstructure effect on ion conduction. By the combined use of freeze-drying and conventional or spark p...     

钢液定氧测头响应时间和热平衡态

本文分别研究了ＺｒＯ２（ＭｇＯ）固体电解质管头壁厚，参比电极量对定氧测头响应时间的影响，得出了以ＺｒＯ２管头壁厚为０．６０－０．８０ｍｍ，Ｃｒ／Ｃｒ２Ｏ３参比电极加入量为４０－６０ｍｇ所组成的定氧测头响应速度最快，同时采用了“双偶法”对定氧测头在工作过程中的热平衡态进行了研究。结果表明：氧浓差电池中的传热是响应过程的控速步骤，氧电势曲线上峰值的产生是起源于电池中的热平衡态。     

纳米SiO2作为蓄电池添加剂的研究

研究了纳米SiO2添加到铅酸蓄电池的极板和电解液中，对电池的起动性能和循环性能的影响。     

Fluoro-Compounds in Electrolytes for Energy Storage Devices

1 Results Electrochemical energy storage devices such as lithium-ion batteries[1-2] and double-layer capacitors[3-4] have attracted a great deal of attention because of their potential application to electric hybrid vehicles. They utilize nonaqueous electrolyte solutions comprising from organic solvents and lithium or quaternary ammonium salts with fluorine-containing anions. This is because the relatively large anions with electron-withdrawing atoms enable ionic dissociation in dipolar aprotic solvents...     

An all solid-state electrochromic smart window

An all solid-state electrochromic smart window employing prussian blue and electrodeposited WO₃ film with poly (vinyl chloride) (PVC) gel electrolyte that has high conductivity (2 mS/cm) at room temperature has been fabricated for the first time. The smart window has beell found to be excellent for electrochromism and memory characteristics.     

脉冲电化学光整加工实验研究

用中性电解液进行脉冲电化学表面光整加工可获得良好的表面质量．着重研究了加工的电流密度及电解液浓度对加工表面质量的影响规律，找出了最佳电解液浓度及电流密度．研究表明，脉冲电化学光整加工技术有望在很多关键零件表面光整加工中发挥重要作用。     

Study on the Ion Association in PVdF-based Gel Polymer Electrolyte

IntroductionGel polymer electrolytes were originally described byFeuillade and Perche[1]and further characterized byAbraham and Alamgir[2 ,3], and formed by trapping liquidorganic solutions in a polymer matrix. Compared with solidpolymer electrolytes , gel polymer electrolytes can contactwith electrode tightly and have a room temperatureconductivity of above 10-3S·cm-1,so they are of practicalinterest for the development of new-design,advancedlithiumbatteries . A variety of polymers as poly…     

非水电化学体系SERS效应研究

本研究了0.10M六氢吡啶/0.10MLiCl/甲醇/Ag电极体系的SERS谱。并与水体系六氢吡啶的SERS谱进行了比较，探讨了它们之间的关系。     

微波衰减常数与电解质溶液浓度关系的研究

研究了微波衰减常数与电解质溶液浓度的关系，首先讨论了将电解质加入到溶剂中后溶剂性质的变化，并对这些作了数学描述。在此基础上，得到了关于微波衰减常数与电解质溶液浓度的定量关系式。此外，还讨论了温度对电解质溶液的微波衰减常数的影响。     

改性PVDF-HFP基凝胶电解质的合成及锂金属电池性能研究

开发高质量的固态电解质,对制造新一代安全稳定的固态锂金属电池具有重要意义。以聚偏氟乙烯–六氟丙烯(polyvinylidene fluoride-hexafluoropropylene, PVDF-HFP)为聚合物基体,引入MOF-808作为活性填料,采用溶液浇筑法制备了新型凝胶聚合物电解质。优化后的凝胶聚合物电解质在室温下的离子电导率高达3.21 mS/cm,电化学稳定窗口可达5.0 V、具有较高的Li^＋迁移数(0.63)、与锂金属具有良好的界面相容性。组装的磷酸铁锂全电池在0.5 C倍率下循环250次,容量保持率为86.7%。高性能凝胶聚合物电解质对提升锂金属电池的循环稳定性与安全性具有重要的应用价值。