J14.6tex纯棉精梳纱成纱质量的工艺分析

通过对纯棉J14．6tex精梳纱生产工艺流程的合理设置和工艺参数调整，力求多唛头组织配棉生产：强化质量控制措施，达到降低产品成本提高产品质量的目的，这是提高企业经济效益和社会效益的一个有效办法。     

绢纺生产用抗静电剂的研究——SS1与SS2绢纺抗静电剂

本文对绢纺生产用抗静电剂的配方进行了研究,研制出SS1及SS2绢纺抗静电剂。应用表明,采用此类抗静电剂,不但降低了生产中的静电,而且提高了梳折;在圆梳系统中提高了3.23％,在精梳系统中提高了3.1％;同时精绵的长度和强力也有所增加,从而提高了经济效益。     

THE PRACTICE OF ACRYLIC SIROSPUN YARN ON THE SEMI WORSTED SPINNING FRAME

The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,breaking extension,evenness and imperfection are examined on the basisof CCD experimental design.Yarn hairiness is particularly concerned,being found that all spinningparameters tested have significant effects on hairiness and that the minimum number of hairs oc-curs at the strand-spacing of 14.4 mm.Compared to conventional single spun yarn,experimentshave revealed the greatest advantage of using sirospun process is that all sirospun yarns have muchless hairiness.A new sirospun yarn fault,so called“loop”,has also been examined.The most likely cause forthis yarn fault is the strand-tension unbalance between the two strands when low tension spinningis applied.Further analysis and some initial tests have been carried out in the hope of overcomingthis loop fault which is an important obstacle to the application of balloonless spinning.     

剪切速率对高浓度再生丝素水溶液构象的影响

对高浓度的再生丝素水溶液（15％～37％）在不同剪切速率下（1000s-1和2000s-1）的构象变化进行了研究，对剪切前后的溶液进行了DSC和Raman对比测试。发现经过剪切，丝素溶液更客易发生从无规线团或α-螺旋向β-折叠构象的转变，且转变的程度随所受剪切速率的增加而提高。而且当丝素浓度低于27％时对剪切不敏感；超过30％时则对剪切敏感。     

再生丝素固体的微细结构

研究了蚕丝丝素水溶液经不同方式干燥后，所得到的再生丝素固体的微细结构，以及存放过程中丝素的结构变化，指出经30℃热风干燥或经高于－20℃冷冻干燥后，所得到的丝素固体的结构是无定形和Silk I共存，在室内温度湿度环境中存放后，部分无定形结构转化为Silk I；蚕丝丝素水溶液经－80－－20℃冷冻干燥后，所得到的丝素膜的结构主要是无定形，含少量Silk II，存放过程中部分无定形结构转化为SilkI；室温放所自然形成的丝素凝胶中，丝素的结构是无定形和Silk Ⅱ共存；丝素水溶液表面膜中甘氨酸和丙氨酸的含量较高，表面膜的结构主要是Silk I和Tilk Ⅱ结晶度高。     

管道纺包芯纱的研究

本文研究了在管道纺纱机上不添加构件而进行包芯纱的纺制。分析了其包芯纱的成纱机理。观察了实际成纱的横截面,证实了棉纤维能够均匀地、完全地包覆在芯丝的周围。也对不同性质的芯丝所纺包芯纱的结构作了观察,并对不同成纱的性质随速度增加而变化的规律作了研究。     

棉纤维与精梳纱之间性能关系的探讨

为了确定棉纤维性能对精梳纱性能的影响，分别从梳棉前的纤维中和同一纺纱工艺流程的粗纱中选同样９种不同的纤维作为试样进行实验。根据实验数据．得到了纤维性能与纱线性能之间关系的回归方程式，为从纤维直接预测纱线性能提供了一条快速、简捷的方法和途径。     

Cu（Ⅱ） effect on the conformation of regenerated silk fibroin in dilute aqueous solution

Much attention has been paid to the natural mechanism of silkworm spinning due to the impressive mechanical properties of the natural fibers. In this work, we studied the effect of Cu（Ⅱ） ions on the secondary structure of Bombyx mori regenerated silk fibroin （SF） in dilute solution by circular dichroism （CD）. The results indicate that a given amount of Cu（Ⅱ） induces the SF conformational transition from random coil to β-sheet, however, further addition of Cu（Ⅱ） is unfavorable for this conversion. Meanwhile, the conformational changes induced by Cu（Ⅱ） follow a nucleation-dependent aggregation mechanism, which is similar to that found in Prion protein （PrP） denaturation and Aβ-peptide aggregations, leading to the neurodegenerative disease. This work would help one understand further the natural spinning process of silkworm. Additionally, it would be significant for the study of the nervous system diseases, because silk fibroin, extracted in large amounts from Bombyx mori silkworm gland, could be a proper model to study PrP denaturation and Aβ-peptide aggregations.     

再生丝心蛋白和羧甲基纤维素复合膜的特性及其在有机相葡萄糖生物传感器中的应用

用再生丝心蛋白和羧甲基纤维素构成的复合膜作为固定葡萄糖氧化酶的基质,并用红外光谱测试了该复合膜的结构,用扫描电子显微镜观察了其形态．用上述复合膜材料固定葡萄糖氧化酶和羧酸二茂铁（或７,７,８,８－四氰代二甲基苯醌,ＴＣＮＱ）制成的葡萄糖生物传感器具有较好的灵敏度与稳定性     

成丝的速度与方式和蜘蛛丝力学性能的关系

为了分析蜘蛛丝的力学性能和成丝条件间的关系,研究了不同速度下人工卷取的蜘蛛牵引丝以及蜘蛛垂直下落时分泌的牵引丝的力学性能.研究结果表明,随着卷取速度的增大,蜘蛛丝的断裂强度有一极大值,在高速卷取时强度的变化较低速时平缓.垂直下落时蜘蛛分泌的牵引丝的综合力学性能优异,但断裂强度不一定大于人工卷取的丝.成丝速度和成丝方式都对蜘蛛丝的性能有很大影响.