粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

EJK951型油水界面传感器在油田中的应用

结合生产实际 ,从不同角度分析了油田生产中油水界面的特性 ,简要介绍了EJK95 1型油水界面传感器的工作原理、特点及在油田生产中的应用情况 ,该表是基于传统的电容式传感器原理 ,结合现代微电子技术而研制生产的一种新型油水界面传感器 ,具有结构简单、测量精度高、稳定性好等特点 ,是油水界面测量中的优选仪表。①     

锥形多层拉深模的设计

为了解决拉深时开裂及多次拉深的问题，探讨了锥形多层拉深模的设计方法．介绍了其结构及参数的确定．该模具改善了拉深件的质量，提高了效率，对类似零件的拉深有借鉴作用．     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

电荷守恒与磁链守恒定律的论证

本文对电荷守恒定律和磁链守恒定律从数学方面作了较深入的论证,并给出了其物理意义。     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。     

Fluoro-Compounds in Electrolytes for Energy Storage Devices

1 Results Electrochemical energy storage devices such as lithium-ion batteries[1-2] and double-layer capacitors[3-4] have attracted a great deal of attention because of their potential application to electric hybrid vehicles. They utilize nonaqueous electrolyte solutions comprising from organic solvents and lithium or quaternary ammonium salts with fluorine-containing anions. This is because the relatively large anions with electron-withdrawing atoms enable ionic dissociation in dipolar aprotic solvents...     

一种高精度低功耗流水线ADC开关电容电路

提出一种新的电容失配校正方案及功耗驱动的OTA设计思路,通过对虚地电容的修正,将电容失配因子在取样保持系统中去除,达到提高电容匹配程度,降低OTA增益误差的要求,使开关电容部分的瞬态功耗下降.本文采用TSMC 0.18μm工艺设计了一个8位,取样速率为200MHz的流水线结构模数转换器作为验证电路,仿真结果说明此优化结构符合高精度和低功耗要求,可应用到流水线等高速模数转换电路中作为信号前端处理模块使用.