Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

基于炉灶热量回收的吸热装置设计

设计了一种基于炉灶热量回收的吸热装置。该装置通过将导热性能及焊接性能优良的无氧紫铜管与炉灶支架焊接成一个整体,近距离吸收炉灶火焰四周散失的热量,利用火焰散失的热量给生活用水加热,将生成的热水供日常生活使用;对出水装置进行改良,使其与加热装置形成循环结构,达到对整个系统进行保护的目的。本装置提高了对能源的利用率,减少了能源消耗,达到节能的目的。     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

R ＆ D STRATEGIC INVESTMENT IN AN ASYMMETRICAL CASE

This article analyzes R ＆ D investment decisions in an asymmetrical case. The investment decisions share three important characteristics. First, the investment is completely irreversible. Second, there are two kinds of uncertainties over the future returns from the investment and over technology in R ＆ D process, respectively. Third, there is strategic competition in the asymmetrical case. This article presents the optimal investment threshold values and the optimal investment rule of high-efficient firm （leader）, and shows that the investment threshold values are reduced by competition of two firms. Finally, the mixed investment strategies for two firms, the probability that each firm separately exercises the option to invest, and the probability that two firms simultaneously exercise the option are given in the paper.     

NIPA类共聚温敏水凝胶中水的状态和耐热性

用N-异丙基丙烯酰胺（NIPA）与丙烯酸钠（SA）及甲基丙烯酸钠（SMA）共聚合成了两个系列的水凝胶，研究了共聚组成与水凝胶基本性质的关系，并用示差扫描量热法（DSC）和热失重法（TG）研究了此类水凝胶中水的状态和耐热性。     

风能地板辐射采暖系统

随着经济快速发展,化石燃料已被大量开发和使用,一方面人类面临能源日渐匮乏的危机,另一方面能源大量浪费也引起全球环境问题.本文以环保和节能为目标,提出一种综合利用风力发电技术、热泵技术和低温地板辐射采暖技术的新型采暖模式,对使用可再生风能进行采暖,进行了可行性探讨.     

40Cr大轴断裂分析

对冶金矿山某产品的40Cr材料制作的大轴热处理后发生断裂现象，进行了理化检验及综合分析，找出了造成大轴断裂原因－首先是由于存在淬火应力，而未得到及时回火，其次是原材料中存在严重的冶金缺陷。     

关于差分式放大器输入电阻的研究

差分式放大器在实际应用方面非常广泛,其理论分析方法的深入研究,对生产实践和教学都有重要的意义。采用电路理论分析、差放理论分析、“虚短”理论分析及实验的方法对差分式放大电路进行了研究。     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。