FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

电动势的测定及其应注意的问题

本课题通过用不同的方法测定的电动势分析,经过电动势测定的误差分析,找到各种方法的利弊,并且对电极制备以及测定电动势的装置进行改进,近而对问题进行探讨。改进后找到实验和研究的捷径,从而在高等学校化学实验以及生产中节省很多的人力和财力。     

咪唑季铵盐棉纤维制备及其对DOSO_3~-吸附性能研究

本文用20%的NaOH溶液对棉纤维的预处理、醚化、接枝合成工艺进行了优化;在不同条件下,研究了咪唑季铵盐棉纤维对DOSO~-_3的吸附性能.结果表明,用NaOH预处理棉纤维后,在适当的条件下醚化棉纤维素,再用氢氧化钠作催化剂,按3 g环氧基纤维素醚与10 mL甲基咪唑配比接枝,得到白色味唑季铵盐纤维素.用咪唑季铵盐棉纤维对DOSO~-_3进行吸附,吸附率可达91.8%,吸附效果令人满意.     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

熔炼数据库的建立和应用

熔炼数据库是合金熔炼多功能软件中的一个模块，本文结合作者在研究和开发软件中的体会，对建立熔炼数据库的必要性、建库过程和应用情况进行了论述．     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

水溶性光疗药物TPPS4的合成及提纯的研究

研究旨在改进光疗药物水溶性四(对磺酸钠苯基)卟啉(TPPS4)的合成方法，特别是产物的提纯方法。以四苯基卟啉为原料，经氯磺酸或浓硫酸处理合成TPPS4，然后进行以渗析和萃取分液为主的后处理。     

盐胁迫对作物形态和生理过程的影响

论述了盐胁迫对作物生长发育及主要生理过程的影响以及盐分对作物造成的直接及间接危害 ,为在盐渍条件下育种及栽培提供理论上的依据