Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

凋亡抑制蛋白与肿瘤关系的研究

凋亡抑制蛋白(inhibitor of apoptosis proteins,IAPs)可以作为癌症诊断和治疗的靶点,在肿瘤研究方面备受关注,就凋亡抑制蛋白的结构、功能、在肿瘤中的表达与肿瘤的关系等研究进展作一综述,为凋亡抑制蛋白的研究提供信息和思路.     

不良地质条件下管道基础处理与施工

管道输送是一种较为安全的运输手段，但在不同的地质条件下的管道设计与施工有着不同的技术要求。文章介绍了在湿陷性黄土地区基处理的几种方法以及灰土及砂垫层处理方法。     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…     

交变磁场对磁性磨粒的作用分析

对处于交变磁场作用下的磁性磨料颗粒的受力和运动规律进行了分析和描述，为交变磁场作用下的磁粒研磨光整加工技术提供了新的思路和工艺选择。     

建筑物地基处理的设计与施工探讨

以具体工程为例，介绍了建筑物地基处理的设计、施工中遵循的原则，施工中遇到特殊情况时采取的处理方法和必要的检测方法，对几种桩基的设计要求、施工工艺及过程、质量控制等情况进行了简单阐述。     

给水处理系统高效经济运行的生产性评价

研究给水处理系统的高效经济运行技术 ,是保证水厂高效、安全、经济供水的重要措施 .生产运行实践证明 ,采用高效经济方式运行的确可以节约可变费用 .尤其是在冬季低温低浊水的净化中 ,可变费用的节约程度最高可达 2 0 %以上     

PLC在磁场压力机中的应用

提出一种采用PLC控制的压制钕铁硼(Nd-Fe-B)磁性材料的机电一体系统，并介绍了系统重要组成部分：压机主体和电控箱，给出了电控箱中各控制部分的电路及工作原理。实验证明本系统具有结构紧凑、操作方便、控制性能好等优点。     

磁存储的研究现状及发展方向

磁性存储是最常用的大容量存储技术。其记录密度越来越高，发展也越来越快。通过对信息记录、读出和存储3个过程的分析，对硬磁盘记录、垂直磁记录和磁光记录的优缺点作了对比。指出了采用垂直记录模式、非晶结构合金薄膜或铁氧体薄膜介质是实现超高密度记录的方向，光辅助磁记录是很有希望的记录技术。还指出量子磁盘技术是未来极高密度记录的方向。     

传染病医院污水处理工艺选择案例

文章通过对临汾市传染病医院拟建的传染病区污水的来源、排放量、污染物的分析,结合污水处理原则,提出了具体的污水处理工艺。并根据污染物去除率预测了污染物浓度,与污染物排放标准进行对比分析,结果表明所选工艺处理后的污染物浓度能够达标,污水处理工艺是可行的。