螺栓连接大变形梁非线性振动特性的实验研究

柔性机械臂、大型可展开天线等机械结构的动作精度受运动过程中大变形几何非线性和连接处接触非线性的影响十分显著。以含螺栓连接结构的大变形梁作为研究对象，针对动力学建模和振动特性开展了实验研究，通过数值计算验证了实验发现的非线性振动特性。搭建了含螺栓连接柔性大变形梁的实验台架，开展了敲击和正弦激振的实验测试。实验结果表明，螺栓连接的柔性梁较连续梁的（无螺栓连接）模态频率降低，阻尼增加，反映出随着激励能量增大，模态频率降低的非线性模态特征。改变螺栓连接位置会显著影响结构的模态频率，其变化规律可由求解线性矩阵特征值定性反映。     

轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

借助Matlab遗传算法反演火山区压力源参数

首先分析了Mogi模型的经典最小二乘反演由于出现矩阵奇异或接近奇异而发散的局限性,决定采用具有全局高效搜索性和优化计算时不需要求导的遗传算法来反演火山区压力源参数。反演程序调用Matlab7.0 Release14工具箱中的选择、交叉和变异等相关程序。最后应用该程序和长白山天池火山区水准和GPS观测资料联合反演火山区压力源参数,经过比较遗传算法和阻尼最小二乘方法的反演结果,可看出2种方法结果近似,可见此方法方便快捷地实现了目标函数的最小化。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

基于长期计划的动态给水管网优化设计模型

鉴于给水管网的优化设计的重要作用，提出了更符合实际、准确度更高的基于长期计划的动态给水管网优化设计模型。其目标函数中，动力费采用与时间相关的函数计算，折旧大修费采用与管段损坏率相关的函数计算，并建立了相应的动态优化设计模型。可以更精确地得出基于长期计划考虑管网优化设计结果。     

连铸坯鼓肚变形的粘弹性分析

本文以发生柱型弯曲的粘弹性簿板为模型,应用Maxwell定律,分析并计算了连铸板坯的鼓肚变形及应力。     

简支阶梯轴弯曲变形的傅里叶级数近似计算

利用广义函数和傅里叶正弦级数来求解简支阶梯轴的挠曲线四阶近似微分方程，推得简支阶梯轴的挠曲线近似方程，进而可以近似计算出其任一截面处的弯曲变形。     

Application of Mathematial-Simulated Model Setup for Eudcational Planning

ＡｐｐｌｉｃａｔｉｏｎｏｆＭａｔｈｅｍａｔｉａｌ－ＳｉｍｕｌａｔｅｄＭｏｄｅｌＳｅｔｕｐｆｏｒＥｕｄｃａｔｉｏｎａｌＰｌａｎｎｉｎｇＦＵＨｏｎｇｙｕａｎ（ＣｈｏｎｇｑｉｎｇＩｎｓｔｉｔｕｔｅｏｆＡｒｃｈｉｔｅｃｔｕｒｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ）Ａ...     

SMA智能复合材料结构的力学分析与建模

介绍了SMA智能复合材料结构力学建模在弯曲变形及振动控制方面的研究现状,论述了连续型和有限元建模方法,分析了SMA智能复合材料结构大变形问题及温度影响问题,并就SMA智能复合材料结构的力学建模提出几点建议。     

建筑物变形观测的过程控制与安全措施

分析了引起建筑物变形的原因及建筑物变形的类型，介绍了建筑物变形观测的实施过程及具体方案，并根据观测结果提出了确保施工与建筑物使用的安全措施。