各向同性介质与单轴晶体界面上e光波法线的折射

根据光的电矢量满足的边条件，对各向同性介质与单轴晶体界面上e光波法线的折射进行了具体的讨论，得到了确定e光波法线在单轴晶体中传播方向的公式，并对几种特殊情况进行了具体讨论。指出了由所得结果可以确定e光光线的行进方向。     

Decoration of disclinations by solidification-induced band texture and focal-conic texture for a low-molar-mass liquid crystal

Two decoration techniques, solidification-induced band texture decora tion and focal-conictexture decoration, have been established to exhibit the director field of disclinations in a low-molar-mass methacrylate liquid crystal. The disclinations with strength s = 1/2 and s = ±1 are observed by the two decor ation methods. For the solidification-induced band texture decoration, the molecular orientation is perpendicular to the direction of the band. While for focal- conictexture decoration, it has been proved by the results of IR dichroism that the direction of the director is parallel to the direction of the focal-conic. Therefore, the sketch map of the molecular director filed can be mapped according to the morphological pattern of the solidification-induced band textureor focal-conic texture.     

关于浮力场概念的引入及其P的力能二重性

在一个均匀且连续充满整个空间的静止液体中引入伴随重力场而存在的浮力场概念,通过它的场力做功揭示其P的力能二重性,进而把浮力场概念推广到液体(理想)的稳定流场中,并以新的观点和方法推导出液体(理想)作稳定流动的一系列重要定理、定律.对于进一步认识浮力本质及其应用有着重要意义.     

炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

THE PRACTICE OF ACRYLIC SIROSPUN YARN ON THE SEMI WORSTED SPINNING FRAME

The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,breaking extension,evenness and imperfection are examined on the basisof CCD experimental design.Yarn hairiness is particularly concerned,being found that all spinningparameters tested have significant effects on hairiness and that the minimum number of hairs oc-curs at the strand-spacing of 14.4 mm.Compared to conventional single spun yarn,experimentshave revealed the greatest advantage of using sirospun process is that all sirospun yarns have muchless hairiness.A new sirospun yarn fault,so called“loop”,has also been examined.The most likely cause forthis yarn fault is the strand-tension unbalance between the two strands when low tension spinningis applied.Further analysis and some initial tests have been carried out in the hope of overcomingthis loop fault which is an important obstacle to the application of balloonless spinning.     

298K毛吸附溴化烷基三甲铵的性质及自由能

用液 /固吸附计量置换模型 ( SDM- A) ,研究了 2 98K羊毛纤维吸附溴化烷基三甲铵阳离子表面活性剂 CTAB和 DTAB的吸附等温线 ,结果表明它们均遵从 SDM- A的线性作图关系 .用 SDM-A的线性参数βα 和 q/z很好地描述了碳氢链长及加盐效应对于吸附性质的影响规律 ,特别是能定量地描述加盐效应对于吸附同时具有的促进和抵消两种相反作用的程度 ,并用 SDM- A的热力学 ,由线性参数计算得到了不同体系的吸附亲和能 ΔGA,解吸能 ΔGD 及总过程的自由能 ΔGP.一个吸附体系中 ,ΔGA 为常数且为较大的负值 ;ΔGD 为随溶液体相浓度 c增大而增大的正值 ;ΔGP为与 lgc呈线性关系的较小的负值 .计算所得结果能很好地解释实验事实 ,并可从更深层次上揭示吸附机理 .     

液压传动系统设计中的几个关键问题

文章分析研究了液压传动系统设计中的几个关键性问题。     

Microstructure transition of Al-Cu eutectic alloy during containerless rapid solidification

Droplets of Al-32.7%Cu eutectic alloy were rapidly solidified during containerless processing in a 3 m drop tube. The microstructural evolution of Al-Cu eutectic alloy depends strongly on droplet size. The eutectic growth morphology changes from regular lamellar eutectic to a kind of anomalous eutectic with the decrease in droplet size. This microstructural transition was analyzed within the current theories of eutectic growth. The results indicate that there exists a critical velocity for eutectic growth beyond which anomalous eutectic appears. The coupled zone of the Al-Cu eutectic alloy system has been calculated on the basis of the Trivedi-Magnin-Kurz(TMK) eutectic growth and the Lipton-Kurz-Trivedi(LKT)/Boettinger-Coriell-Trivedi(BCT) dendrite growth models, which provides a further interpretation for the morphological transition.     

乳化液膜法净化湿法磷酸除镁研究

采用乳化液膜技术对湿法磷酸进行脱镁净化是一种净化湿法磷酸的新途径。采用正交试验设计方法组织实验，结果表明在实验研究范围内，萃取剂对湿法磷酸中脱镁效果有高度显著的影响，而表面活性剂、膜试剂和反萃取剂对镁的脱除有一定影响。