粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

叠片式小啮合角剃齿刀设计原理

本文介绍了小啮合角剃齿刀的设计原理和有关计算公式，并给出设计实例。按本文设计的叠片式小啮合角剃齿刀通用性好，有利于减少刀具库存。     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。     

Study on Ceramic Cutting by Plasma Arc

Engineering ceramics are typical difficult-to-machine materials because of high hardness and brittleness. PAC (Plasma Arc Cutting) is a very important thermal cutting process and has been successfully used in cutting stainless steel and other difficult-to-machine alloys. PAC‘s application in cutting ceramics, however, is still limited because the most ceramics are not good electronic conducts, and transferred plasma arc cannot be produced between cathode and work-piece. So we presented a method of plasma ...     

Mindlin层合圆柱壳理论的Hamiltonian结构与辛解析解

通过引进状态变量及其对偶变量。建立Ｍｉｎｄｌｉｎ层合圆柱壳的Ｈａｍｉｌｔｏｎ正则方程．在辛几何数学框架下，采用共轭辛正交归一关系给出各种复杂边界条件下的精确解．     

一种压电复合材料层合板机电耦合有限单元

基于压电复合材料层合板经典理论,建立了一种四边形机电耦合有限单元．所建单元具有ｍ个电自由度,可直接模拟单元中的电压作用和检测电压输出;单元每一节点具有５个位移自由度,可计及复合材料层合板的拉弯耦合变形．给出了各类刚度矩阵的形式,简述了利用Ｈａｍｉｌｔｏｎ原理推导出机电耦合基本运动方程的过程,并根据所推导的有限元素和基本方程编制了程序并进行了计算,所得结果与文献中的计算和试验结果相吻合．     

新型压电陶瓷涡街流量计

介绍一种新型的压电陶瓷涡街流量计,该流量计采用ＢＳＴ压电陶瓷元件来检测旋涡释放频率,使该流量计能在高温工况下工作,一年多的工业现场运行试验结果表明,新研制的涡街流量计可靠性高、稳定性好,在４００℃高温和１０ＭＰａ高压下能长期连续正常运行。