城市区域多物流无人机协同任务分配

针对城市区域多无人机协同物流任务分配问题, 综合考虑不同无人机性能、物流时效性、飞行可靠性等影响因素, 以经济成本、时间损失和安全风险最小为目标函数, 构建多无人机协同物流任务分配模型。因问题规模大、求解复杂度高, 设计改进的量子粒子群算法进行求解。首先，为增强粒子遍历性和多样性, 采用均匀化级联Logistic映射进行粒子初始化; 其次，为避免算法陷入局部最优解, 引入基于高斯分布的粒子变异方式; 最后，为提高算法运行效率, 运用自适应惯性权重方法对粒子赋值。仿真实验结果表明，所构建的模型能够实现任务分配多目标优化, 贴近城市区域无人机物流配送实际; 所提算法与传统量子粒子群算法和遗传算法相比, 任务分配代价分别下降了5.9%和6.3%;并进一步对参数权重设置进行分析, 当3个子目标函数权重系数分别为0.225、0.275和0.500, 种群规模为150时, 算法规划的结果最优。     

基于免疫粒子群优化的移动Sink路径规划算法

为了减少能量空洞和延长网络生命周期，在无线传感网中采用移动 Sink 的方式收集节点采集的数据是解决能 量效率问题的有效措施．采集路径的规划问题类似于旅行商问题，无法得到多项式时间的解．提出了将人工免疫算法和粒子群算法相结合，针对移动 sink 数据收集的路径规划问题寻求近似最优解，仿真结果表明: 与其他算法进行性能比较，所提出的优化算法能够有效减少能耗和缩短遍历路径．     

Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250℃with the addition of CaO–CaF2–H3BO3

The method of producing ferronickel at low temperature(1250–1400℃)has been applied since the 1950s at Nippon Yakin Kogyo,Oheyama Works,Japan.Limestone was used as an additive to adjust the slag composition for lowering the slag melting point.The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching.To increase the efficiency of magnetic separation,a large particle size of ferronickel is desired.Therefore,in this study,the influences of CaO,CaF₂,and H₃BO₃ additives on the evolution of ferronickel particle at≤1250℃were investigated.The experiments were conducted at 900–1250℃with the addition of CaO,CaF₂,and H₃BO₃.The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere.At 1250℃,with the CaO addition of 10 wt%of the ore weight,ferronickel particles with size of 20μm were obtained.The ferronickel particle size increased to 165μm by adding 10 wt%CaO and 10 wt%CaF₂.The addition of boric acid further increased the ferronickel particle size to 376μm,as shown by the experiments with the addition of 10 wt%CaO,10 wt%CaF₂,and 10 wt%H₃BO₃.     

带变量核的分数次积分交换子在变指数Herz-Morrey空间上的有界性

证明了带变量核的分数次积分算子T_(Ω,μ)与Lipschitz函数b生成的高阶交换子[b~m,T_(Ω,μ)]在变指数Herz-Morrey空间MK_(q,p)~(α,λ)(·)(R~n)上的有界性.     

车辆路径问题的粒子群算法研究

车辆路径优化问题是一类具有重要实用价值的组合NP问题．粒子群算法(panicle swarm optimization)是一种新出现的群智能(swarm intellingece)优化方法，将其应用于车辆路径优化问题，构造车辆路径问题的粒子表达方法，建立了此问题的粒子群算法，并与遗传算法作了对比试验．结果表明，粒子群算法可以快速、有效求得车辆路径问题的优化解，是求解车辆路径问题的一个较好方案。     

过滤机液位控制系统在洗煤厂的应用

介绍了过滤机液位控制系统的结构、功能及其在洗煤厂的应用情况，并根据其运行结果，指出了需改进的部分。     

燃料添加剂对柴油机烟粒燃烧的影响

考察了燃料添加剂对降低柴油机烟粒燃点温度的效应。含金属添加剂的柴油机烟粒被收集在金属纤维过滤器上,把原状烟粒样品移入实验室反应器,用模拟柴油机排气进行燃烧试验。实验结果表明,当烟粒中含有Pd或Cu时,烟粒的燃点温度可降至430℃左右(普通柴油机烟粒的燃点温度约600℃);Pd的添加还可大大降低烟粒一次燃烧产物中CO的分率。文中还对金属(催化剂)/烟粒接触程度和添加剂溶液中可燃性部分对烟粒燃烧的影响作了讨论。     

Homology Priority Task Scheduling in μC/OS-Ⅱ Real-Time Kernel

μC/OS-Ⅱ is an open source real-time kernel adopting priority preemptive schedule strategy. Aiming at the problem of μC/OS-Ⅱ failing to support homology priority tasks scheduling, an approach for solution is proposed. The basic idea is adding round-robin scheduling strategy in its original scheduler in order to schedule homology priority tasks through time slice roundrobin. Implementation approach is given in detail. Firstly, the Task Control Block （TCB） is extended. And then, a new priority index table is created, in which each index pointer points to a set of homology priority tasks. Eventually, on the basis of reconstructing μC/OS-Ⅱ real-time kernel, task scheduling module is rewritten. Otherwise, schedulability of homology task supported by modified kernel had been analyzed, and deadline formula of created homology tasks is given. By theoretical analysis and experiment verification, the modified kernel can support homology priority tasks scheduling, meanwhile, it also remains preemptive property of original μC/OS-Ⅱ.     

利用DA算法实现大规模FIR滤波器

分布式算法是一种广泛地应用在可编程逻辑序列（FPCA）和ASIC设计中计算乘积和的算法。DA算法的处理速度仅与输入的位宽有关，对于大规模乘积和的运算，其计算速度有着明显的优势。当输入位宽过大时，可以将DA算法改进成并串结构以获得更快的处理速度。该文对在FPCA中利用DA算法实现大规模FIR滤波器，提出了具体的实现方案。     

生物荧光激发滤光片及栅滤光片的研制

本文论述生物荧光激发滤片及栅滤光片的膜系设计，压缩滤光片通带的新方法以及制备滤光片所采取的工艺措施。