SAR图像并行拼接方法研究与实现* 〖HT4K〗——基于改进完全二叉树模型

随着SAR成像技术的快速发展，SAR图像覆盖的地域范围与成像精度也在迅速增长，这对SAR图像拼接工作的实时性提出了挑战;文章对SAR图像序列特征进行深入分析，提出了采用基于分割的完全二叉树模型进行SAR图像的并行拼接，并使用MPI点对点通信方式对之进行了不同数量机群规模下的实现；对比实验证明，基于该方法的并行拼接工作比传统并行拼接方法在降低拼接时耗上更加有效，且并行拼接后的完整图像效果良好.     

数控仿真中切削面计算的并行化研究

针对高离散精度模型与刀具包围体进行切削计算的情况,由于三维图像重建的计算量大,基于传统CPU实现的数控加工仿真系统不能满足实时性的三维绘制。本文利用GPU的并行性特点,提出并行方式数控仿真切削面显示算法:通过线程并行处理基于MC算法的实体构造模型中体素与刀具包围体的切削计算,根据切削后体素角点信息和边的状态查找建立的构型索引表和交点数目索引表,加速数控仿真切削面的提取,从而提高三维图像的绘制速度,满足实时性显示要求。     

一种立体织机平行打纬机构的设计与优化

针对多层织物织造过程中,各层纬纱打纬力需保持一致以及需要减少钢筘与纱线之间摩擦的要求,提出八连杆平行打纬机构,并根据工艺要求对打纬机构进行优化。以打纬机构的主轴转动140°时,筘座在后心位置处的近似静止位移Δs最小为优化目标,通过Matlab软件分析确定设计变量,优化钢筘在后死心位置的近似停留时间。运动学仿真结果表明,优化后的打纬机构不仅保证了钢筘的打纬动程和其在后死心处的静止时间,而且增大了钢筘的惯性打纬力,有利于厚重织物的打纬。     

Recent advances and challenges in materials for 3D bioprinting

3D bioprinting has been developed as a promising technology in a wide variety of biomedical applications. However, the successful implementation of bioprinting is still heavily restricted by the relatively narrow range of printable and biocompatible materials. Recently, many comprehensive reviews of the main bioprinting methods, commonly used bioprinting materials and the trending bioprinting applications have been carried out. In this review, we focused on the trends in the development of materials for 3D bioprinting. The significance and recent advances of ECM-based materials, multi-material and stimuli-responsive materials for bioprinting were summarized successively. Moreover, the challenges in current studies and future perspectives of materials for 3D bioprinting were discussed.     

基于交通信号灯信息的混合动力汽车节能预测控制方法

针对传统混合动力汽车控制方法不考虑已知道路交通信号灯信息对车辆能量管理影响的问题,提出了基于交通信号灯信息的混合动力汽车节能预测控制智能优化策略。通过建立混合动力汽车系统的简化模型,并采用连续广义最小残量方法求解模型预测控制问题。运用MATLAB/Simulink进行仿真,仿真结果验证了交通信号灯信息模型的有效性,以及所设计的模型预测控制算法大幅度提高混合动力汽车的燃油经济性的能力和实时控制性能。研究结果表明所提出的控制策略可以实现车辆行驶轨迹的优化控制,显著提高了车辆的燃油经济性,并满足系统的实时最优控制要求。     

求解多项式重零点的并行迭代方法

建立了一种至少4阶收敛的求解多项式重零点的并行迭代方法，分析并证明了相应的收敛性定理。     

An ERP study for the degrees of the difficulty in visual search

The present study mainly probed the relationships between ERP components and the degrees of difficulty in visual search. Three experimental and one controlled conditions were randomly selected. Results showed that the P1, N1, and P2 amplitudes and latencies had no significant differences among the three experimental and one controlled conditions, and the ERP waveforms of low perceptual load of visual search were different from that of high perceptual load. These results might indicate that the latencies and amplitudes of initial P1, N1 and P2 in high and low perceptual load conditions were almost the same. The ERP waveforms of parallel search were very different from that of serial search, and the ERP waveforms of serial search were very similar. The P3 amplitudes increased as the degrees of the difficulty in visual search decreased.     

Sasakian空间形式中具有平行平均曲率向量的C-全实子流形的刚性定理

讨论了Sasakian空间形式中具有平行平均曲率向量的C-全实子流形,得到了紧致的C-全实子流形的一个刚性结果.