基于多材质复合管柱的裸眼井壁支撑工艺及应用

已完钻超深裸眼水平井侧钻技术是经济、高效开发油藏剩余油的主要手段之一，传统的磨铣钢套管开窗侧钻技术存在下入摩阻大、磨铣耗时长导致开窗失败等问题。为此，提出了基于多材质复合管柱的超深水平井裸眼井壁支撑工艺，结合中国西北油田已完钻超深裸眼水平井井况，首先，提出了基于“铝合金+碳钢”的多材质复合管柱组合及设计方法；其次，开展了基于管柱实物屈曲实验数据的管柱临界屈曲载荷计算模型适用性评价，并优选出了适合于“铝合金+碳钢”多材质复合管柱的屈曲临界载荷计算模型；最后，研究了综合考虑管柱扭矩、摩阻、刚性、井眼条件、管柱强度及材质的多材质复合管柱下入性分析方法，并利用下入性分析软件对西北油田顺北X1井、X2井、X3井、X4井复合管柱进行了下入可行性评价。该方法在X1井和X2井得到成功应用，进一步论证了该工艺现场应用的可行性。研究成果可为超深水平井裸眼井壁支撑的复合管柱设计和下入可行性评价提供理论参考。     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

基于改进多目标遗传算法的连铸二冷过程优化

采用一种改进的多目标遗传算法对二冷工艺进行优化.改进的多目标遗传算法应用概率法选取选择算子，根据适应度值来动态计算交叉和变异概率，能够得到更好的全局最优解，提高算法精度和整体性能.在基于凝固传热模型的二冷优化过程中，采用变间距差分法离散求解传热方程，对比粒子群算法、多目标遗传算法，改进的多目标遗传算法搜索效率高，得到的价值函数最小.在实际生产中，采用优化后的二冷工艺，使得总用水量减少约10%，提高了铸坯质量，达到了节能降耗的要求.     

激光快速成型TC4合金显微组织及力学性能

采用金相显微镜、扫描电镜、电子拉伸机等，研究了激光快速成型TC4合金沉积态在平行沉积方向和垂直沉积方向的组织和力学性能.结果表明:激光快速成型TC4合金沉积态宏观组织沿沉积方向生长的粗大β柱状晶呈明暗相间的条带状结构，具备典型的魏氏组织特征;垂直沉积方向的强度比平行沉积方向的强度高，但塑性低;合金断口为韧窝状断口，垂直沉积方向的断口韧窝尺寸比平行沉积方向的小.     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

基于炉灶热量回收的吸热装置设计

设计了一种基于炉灶热量回收的吸热装置。该装置通过将导热性能及焊接性能优良的无氧紫铜管与炉灶支架焊接成一个整体,近距离吸收炉灶火焰四周散失的热量,利用火焰散失的热量给生活用水加热,将生成的热水供日常生活使用;对出水装置进行改良,使其与加热装置形成循环结构,达到对整个系统进行保护的目的。本装置提高了对能源的利用率,减少了能源消耗,达到节能的目的。     

运用试验设计法优化某军品压铸弹尾工艺

根据某军品部件出现的问题，应用试验设计法成功地找出了最优组合，提高了该部件的强度，解决了该强度问题，使生产得以正常进行。     

非水溶剂中稀土大环四胺配合物的电导研究

用电导法研究了30℃时二甲基甲酰胺、二甲基亚砜认中稀土硝酸盐与5，7，7，12，14，14－六甲基－1，4，8，11－四氮杂十四环二烯（4，11）的配位作用，测定了1：1配合物的稳定常数lgKML及摩尔电导率AML。同一配合物在极性较小的二甲基甲酰胺溶液中稳定性较高，摩尔电导率AML较小，两种溶剂中，随着稀土离子RE^3 半径的减小，配合物的稳定性均在增大，摩尔电导率AML在逐渐减小。     

风能地板辐射采暖系统

随着经济快速发展,化石燃料已被大量开发和使用,一方面人类面临能源日渐匮乏的危机,另一方面能源大量浪费也引起全球环境问题.本文以环保和节能为目标,提出一种综合利用风力发电技术、热泵技术和低温地板辐射采暖技术的新型采暖模式,对使用可再生风能进行采暖,进行了可行性探讨.