Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

创新研究系统隐性知识生成转化反馈环特性仿真分析

隐性知识反馈环结构是创新研究系统的核心结构,运用组织管理系统动力学理论,进行科研创新系统隐性知识生产转化系统仿真研究,以南昌大学系统动力学创新团队研究系统为例,分析确定该系统的隐性知识量、显性知识量、创新投资量、团队人员数和创新成果量五个核心变量,运用新建的逐枝建模和逐树仿真技术建立五棵流率基本入树模型及其等价流图模型.运用枝向量行列式新增反馈环计算法,计算出系统包含创新成果流位作用于隐性知识流入率的第一类反馈环五条,团队成员数作用于隐性知识流入率第二类正反馈环十条.然后,结合模型的仿真曲线和仿真数据,对第一类反馈环进行极性转移仿真分析和主导反馈环转移仿真分析,对第二类正反馈环进行正反馈环的作用分析,以及"原始创新度"低对这十条正反馈环的制约分析,并基于上述十五条反馈环特性仿真分析结果提出四条创新研究系统发展对策.     

图书管理系统的设计与应用

结合图书馆信息化发展趋势,对图书管理系统的功能特点进行了总结,并详细介绍了图书管理系统的设计与应用.     

“二三结合”开发模式渗流特征研究

L油田B区块开展"二三结合"实验区,"二三结合"开发模式渗流特征对区块的合理高效开发具有重要意义。为了明确其渗流特征,利用油藏数值模拟软件Eclipse建立代表意义的油藏数值模型,研究区块"二三结合"开发模式下原射孔层和补孔层的渗流特征,分析了"二三结合"开发模式下,不同开发阶段综合含水率、采出程度、井底压力、地层压力及含水饱和度的变化特征。研究表明,"二三结合"开发模式先通过水驱开发挖潜原射孔层剩余油,提高厚油层顶部剩余油的采出程度,再通过聚合物驱进一步提高开发效果,通过水驱与聚驱的综合作用,最终得到较好的开发效果。     

不同周围流速和电压下的绝缘子积污特性

为了研究绝缘子在不同电压下表现的积污特性，利用流体力学的相关知识和电场理论，建立了模拟风沙的多物理场仿真模型.研究结果表明，周围流动速度较小时，绝缘子两端的电压增大，积污质量发会有一定程度的增加，且积污与电场力的变化密切相关，结合静电场分析会更准确；周围流动速度较大时，即使电压增大，积污质量也不会发生太大的变化.     

高速电主轴热特性仿真与实验研究

对高速电主轴温度场分布随转速的变化规律进行了研究。通过在外壳上布置一定数量的温度传感器,对不同转速下的外壳温度进行实时测量,并将实验结果与ANSYS的模拟结果进行对比,验证了采用在电主轴外壳上布置多个测点测量与仿真相结合的方法来预测电主轴内部温度场分布的可行性;另外还分析了在不同转速下,高速电主轴关键部位的温升,仿真结果表明:主轴在6000~10000 r/min时,温升呈线性增加,在大于10000 r/min后,温升以指数规律增加。     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

对高校道德实践教育的探讨

文章从道德教育的实践要求、特征、途径等方面，阐述了道德实践在道德教育过程中的地位和作用，并从高校道德教育实际出发，提出了加强道德实践训练的有关措施与方法。     

NIPA类共聚温敏水凝胶中水的状态和耐热性

用N-异丙基丙烯酰胺（NIPA）与丙烯酸钠（SA）及甲基丙烯酸钠（SMA）共聚合成了两个系列的水凝胶，研究了共聚组成与水凝胶基本性质的关系，并用示差扫描量热法（DSC）和热失重法（TG）研究了此类水凝胶中水的状态和耐热性。