轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

交变磁场对磁性磨粒的作用分析

对处于交变磁场作用下的磁性磨料颗粒的受力和运动规律进行了分析和描述，为交变磁场作用下的磁粒研磨光整加工技术提供了新的思路和工艺选择。     

High precision topographic data on Lop Nor basin's Lake "Great Ear" ? and the timing of its becoming a dry salt lake

High precision elevation measurements using DGPS were carried out along three representative tran- sects for the "Great Ear" area, a dry salt lake within the Lop Nor basin. Results indicate that the Lop Nor basin is only 5.2 m deep and its lowest point occurs at the center of the "Great Ear". In addition, the basin is asymmetric - steeper in the southwest (0.19‰) and gentler in the northeast (0.09‰). Points along the same "Great Ear" ring were found to have an identical elevation value, but different when from different ones (lower towards the center). The spacing of the "Great Ear" rings was found to be closely related with the surface steepness. The closer the "Great Ear" rings are spaced, the steeper the ground surface, and vice versa. These findings support the argument that the "Great Ear" rings are the former shoreline trails left behind by Lop Nor water during the last few episodes of recession towards its total dry up. A comprehensive analysis of the high precision elevation data, historical accounts, aerial and satellite photographs and imagery, and official topographic maps of the study area suggests that the "Great Ear" area in the Lop Nor basin was incorrectly mapped as being covered by a great body of water on the 1963 topographic maps. A re-interpretation of the 1958 aerial photographs and newer remote sensing imagery indicated that the "Great Ear" ring structure was already in place in 1958 and it continued to appear on the subsequent remote sensing data without any major changes. It is estimated that lake water in the "Great Ear" area of the Lop Nor basin disappeared between the late 1930s and early 1940s.     

强化传热生物质燃料热风炉研究

研制出用于粮食及其它农副产品干燥的新型热风炉。此炉型采用生物质燃料洁净燃烧技术及高强化传热技术,具有低污染、高效率、长寿命等优点。     

真空冷冻干燥机凝结器的改进

分析了真空冷冻干燥机水汽凝结器存在容易造成"冰塞"的原因,并提出了安装气流扩散器的改进方法,对改进前后的凝结器捕水性能进行了比较.由于气流扩散器的安装,捕水周期得以延长,捕水能力及工作效率显著提高,实用性较好,而且扩散器的制作费用低,性价比高,有推广价值.     

花岗岩磨削磨粒破碎性能研究

花岗岩是一种含硅酸量较多的酸性深层岩。目前国内的石材加工由于磨削工艺不尽合理,磨削质量不符要求,因而需依靠进口磨具。本实验通过不同磨料对不同花岗岩进行单颗粒磨削,探索其规律,为合理选择和使用磨具提供理论依据。     

新型锆质不定形耐火材料的研制

以废旧电熔锆刚玉为主要原料,采用合理的粒度级配,应用复合结合剂和外加剂以凝聚结合的方式研制成功具有高荷重软化温度、高强度、低气孔率、低烧结线变化的新型锆质不定形耐火材料。图4,表4,参3。     

碳酸钕对AZ91合金组织的细化和腐蚀性能的影响

通过介绍实验条件实验方法及结果,并对其进行讨论,研究碳酸钕对A291合金组织的细化和腐蚀性能的影响。     

氧化物半导瓷中晶界势垒的起源

提出了一个关于氧化物半导瓷晶界势垒起源的新观点，认为晶界势垒起源于烧结过程中外界氧在晶界中的扩散，与材料的结构、化学缺陷、掺杂、外界气氛、烧结工艺、组成状态等有密切关系，并用此理论解释了许多实验现象。     

金属间化合物Ni3Al中的硼晶界偏聚特性的AES研究

本文应用俄歇能谱仪研究了不同化学计量比ＮｉＡｌ金属间化合物硼在晶界偏聚的特性。研究结果表明：硼在Ｎｉ３Ａｌ的各个晶界偏聚存在着不均匀性，硼在晶界的偏聚范围只有几个原子层，晶界结构及晶界化学环境是影响在晶界偏聚的决定因素。