基于LQG控制的整车8-DOF系统振动分析

建立了整车8-DOF系统动力学模型,考虑了主动悬架控制,并增设了主动座椅控制,设计了车辆主动悬架系统的LQG控制器。基于Matlab仿真平台建立了整车8-DOF系统动力学仿真模型,对所得最优控制策略下的动态响应进行了仿真验证。仿真结果表明:为了改善人椅系统质心及车身质心的跳振性能需要在一定程度上弱化各轮轮胎动位移性能。从控制效能上来看,该最优控制器能够满足各行驶状态下对悬架性能的要求,改善了车辆的行驶平顺性。     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

基于改进多目标遗传算法的连铸二冷过程优化

采用一种改进的多目标遗传算法对二冷工艺进行优化.改进的多目标遗传算法应用概率法选取选择算子，根据适应度值来动态计算交叉和变异概率，能够得到更好的全局最优解，提高算法精度和整体性能.在基于凝固传热模型的二冷优化过程中，采用变间距差分法离散求解传热方程，对比粒子群算法、多目标遗传算法，改进的多目标遗传算法搜索效率高，得到的价值函数最小.在实际生产中，采用优化后的二冷工艺，使得总用水量减少约10%，提高了铸坯质量，达到了节能降耗的要求.     

凋亡抑制蛋白与肿瘤关系的研究

凋亡抑制蛋白(inhibitor of apoptosis proteins,IAPs)可以作为癌症诊断和治疗的靶点,在肿瘤研究方面备受关注,就凋亡抑制蛋白的结构、功能、在肿瘤中的表达与肿瘤的关系等研究进展作一综述,为凋亡抑制蛋白的研究提供信息和思路.     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

基于炉灶热量回收的吸热装置设计

设计了一种基于炉灶热量回收的吸热装置。该装置通过将导热性能及焊接性能优良的无氧紫铜管与炉灶支架焊接成一个整体,近距离吸收炉灶火焰四周散失的热量,利用火焰散失的热量给生活用水加热,将生成的热水供日常生活使用;对出水装置进行改良,使其与加热装置形成循环结构,达到对整个系统进行保护的目的。本装置提高了对能源的利用率,减少了能源消耗,达到节能的目的。     

不良地质条件下管道基础处理与施工

管道输送是一种较为安全的运输手段，但在不同的地质条件下的管道设计与施工有着不同的技术要求。文章介绍了在湿陷性黄土地区基处理的几种方法以及灰土及砂垫层处理方法。     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…     

建筑物地基处理的设计与施工探讨

以具体工程为例，介绍了建筑物地基处理的设计、施工中遵循的原则，施工中遇到特殊情况时采取的处理方法和必要的检测方法，对几种桩基的设计要求、施工工艺及过程、质量控制等情况进行了简单阐述。