多级孔板提高井筒气体携液能力实验研究

气井生产时，井底积液会影响气井产量，甚至导致气井停产。加入泡沫剂、更换小直径油管或氮气举升等措施排出井底积液是保证气井生产的重要手段，但造成液体回流的井筒结构并没有变化。改变适合于单相流体的均一井筒结构，降低气液两相流中液体在井筒的回流，提高气体携液能力，形成适用于气液两相流的井筒结构，可以改善气井生产。实验设计了安装于管筒内的类似于倒置漏斗形的多级孔板装置，以井底气体为动能，借助“爬楼梯”原理，利用孔板减少或阻止液体回流，使液体通过多级孔板逐级上升；实验利用气体压缩机提供气源，测试了不同气体流速下，加入孔板对于气体和泡沫携液能力的影响。实验表明，在管筒内加入液体回流限制装置，大幅度地提高了管筒的气体携液能力和排液效果，减少了管筒液体回流量，降低了气体排液和泡沫排液的气体流速临界值。多级孔板可用于气井增产，能够提高气体携液能力，提高泡沫携液效果，降低泡沫剂的使用量和井底残液，但在实际生产中气体流量和装置的匹配性，还有待于在现场试验中进一步验证和优化。     

制备泡沫铝的一种新方法:烧结溶解法

烧结溶解法是近几年发展起来的一种制造泡沫铝的新工艺，具有可以精确控制孔洞形状，尺寸和孔隙率及其分布等特点，具有较好的质量价格综合指数，是生产均匀或梯度微细开孔中密度泡沫铝的有效方法，所制泡沫铝在吸能，吸音等领域有广泛的应用前景。本文简要介绍烧结溶解法的原理与工艺，所制泡沫铝的组织特征与机械性能，并讨论与其它各类现有方法相比所具有的优势与局限。     

泡沫的持液量研究

泡沫的持液量（ｈ，ｍｇ／ｃｍ３）是泡沫的基本特性之一．本文对形成泡沫的起泡剂浓度、增粘剂浓度、气体流量和温度等因素对Ｈ的影响及变化规律作了研究，并对Ｈ与泡沫表观粘度和泡沫半衰期的相互关系作了描述，对泡沫的实际应用具有一定的指导意义．     

CO2泡沫压裂液两相流流动特性的试验研究

通过大型高参数泡沫压裂液试验回路首次详细研究了实际压裂条件下CO2泡沫压裂液的流变特性,得出了实际压裂条件下CO2泡沫压裂液流变参数的计算关联式,从而为低渗油气藏泡沫压裂技术的有效实施提供了试验依据.研究表明:在实际施工条件下,CO2泡沫压裂液具有剪切稀化性质,可用幂律模型来描述;其有效粘度随剪切速率、温度的增高而减小,随压力、泡沫质量的增大而增大;相对而言,温度和泡沫质量对流变参数的影响比压力的影响明显,在该试验范围内,温度和泡沫质量对流变参数的影响呈指数规律变化.     

泡沫分离法除去污水中十二烷基苯磺酸钠的研究

对采用泡沫法分离污水中十二烷基苯磺酸钠进行了研究，结果表明，当采用一个平衡级，气液比为1：5，停留时间为35-40min时，脱除率可达92.5%。     

硬质聚氨酯泡沫塑料的开发

以废聚酯(瓶)为原料,研究了废聚酯瓶料醇解成芳香族聚酯多元醇的工艺。探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。     

湿法磷酸中铁的泡沫浮选净化研究

采用泡沫分离技术净化湿法磷酸除铁是一种新工艺。用正交试验设计法组织实验，结果表明，在实验所研究的范围内，络合剂对泡沫分离净化湿法磷酸除铁有特别显著的影响，含氮助剂以及络合剂和含氮助剂的交互作用对除铁有一定影响，其余因子的影响不大。     

道路标线涂料的正交试验研究

以苯乙烯为反应性溶剂，废旧聚苯乙烯泡沫塑料、不饱和聚酯树脂为主要原料制备道路标线涂料，通过正交试验确定了涂料的最佳配比。制备的道路标线涂料具有施工方便、涂膜厚度适当、附着力强、气候适应性强等特点。并通过电镜分析对涂膜的微观结构进行了初步探讨。     

Spawning behaviour of Engystomops pustulatus (Anura: Leptodactylidae)

Foam nests have evolved independently in several amphibian groups as an adaptive response to prevent predation and desiccation in dry environments. Nests are normally laid on ponds, or in underground galleries, humid forest leaf litter or terrestrial bromeliads. They are built when males or females beat a foam precursor associated with the egg masses extruded by the female. The spawning process requires the synchronic actions of the mating pair to obtain a hemispheric nest that protects the offspring. Herein, we describe the spawning behaviour of Engystomops pustulatus based on videos from 13 nesting couples from the lowlands of western Ecuador. Three variables were measured as indicators of male effort: duration of mixing events, duration of resting periods, and number of kicks per mixing event. We consider that not only male physical effort but also female behaviour influences nest structure. We suggest that nest building requires prolonged and intense physical activity by the male as well as the female’s steady position during spawning and female’s oviposition site selection. Nest building has two phases. In the first phase, the duration of resting periods, the duration of mixing events, and the number of kicks increase and are highly variable. During the second phase the three variables stabilise until the end. The volume of the nest increased mainly during the second phase. In four nesting events we observed kicking movements by the female. To our knowledge, this is the first time that female kicking has been observed in leptodactylid frogs. The function of this behaviour is unknown but our observations suggest that it may be triggered by insufficient male effort. Traditionally, female mate choice in Engystomops has been explained under models of indirect benefits exclusively. We argue that the prolonged male activity during nesting could influence female fitness directly. This will allow the operation of sexual selection via direct benefits.     

Flame spread over the surface of thermal insulation materials in different environments

Experiments were conducted in a plateau area in Lhasa and a plain area in Hefei China to investigate the flame spread characteristics on thermal insulation materials under different environmental conditions (pressure and oxygen concentration).Molded polystyrene foam (EPS) and extruded polystyrene foam (XPS) samples were placed horizontally on a small-scale flame spread experimental bench.Changes in the average length of the pool fire,flame spread speed,average flame height,and length of preheating zone were used to determine the effect of the plateau and plain environments on flame spread characteristics.These parameters were all larger in Hefei than in Lhasa,which indicates the fire hazard in Hefei will be higher than that in Lhasa if insulation materials of the same size are used.