Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

基于网络最大流的城市雨水管网系统脆弱性评价

为了对城市雨水管网系统进行针对性的改建,在暴雨天提高事故抢修速度,需要对城市雨水管网系统进行脆弱性评价并找出脆弱管段.首先介绍了城市雨水管网系统排出雨水的干扰因素,提出了城市雨水管网系统脆弱性的概念,并逐一分析了影响城市雨水管网系统的因素,综合考虑各方面因素,建立了城市雨水管网系统的脆弱性评价模型.在此基础上,结合图论中网络最大流理论,寻找城市雨水管网系统中的脆弱管段.最后以西安某高校的雨水管网系统为例进行研究,测得了该高校雨水管网系统的脆弱度为0.877,证明该区域雨水管网脆弱性较低,不易形成内涝,并找出该高校雨水管网的脆弱管段.     

一种电力网络潮流计算的综合算法

针对牛顿-拉夫逊法对初值要求严格,迭代速度快的特点,利用电力网的结构特点,使用高斯-塞得尔迭代法的第一次迭代结果作为牛顿-拉夫逊法的计算初值。这样既解决了牛顿-拉夫逊法对初值要求高的问题,又提高了收敛速度。计算结果表明,综合算法在迭代次数和收敛速度上有优势。     

heory, controls parameter and application of the packed-bed electroosmotic pump

Theory and controls parameters affecting the output pressure and flow rate of the packed-bed electroosmotic pump (p-EOP), including zeta potential ζ, electric intensity E, length of the column L, cross-section area of the column A, dielectric constant ε and viscosity coefficient η of the liquid being pumped, are discussed concisely. And also, the fabrication and application of the p-EOP are introduced.     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

新型流量传感器在呼吸机上的应用

介绍了AWM720P1新型气体流量传感器的工作原理、性能、特点．针对呼吸机的工作特点，分析了IPPV的流速模型、流速的测量方法、传感器的校正数据处理方法．     

任职经济责任审计系统设计与实现

该系统严格遵照国家干部经济责任审计的有关准则与规定，能够对企事业单位、行政单位等不同部门各个层次的领导干部，从内控制度、管理、经营、财务等多方面、多角度、全方位地进行跟踪审计，客观公正、实事求是地对有关报表数据进行科学分析，恰如其分地认定干部实绩和经济责任。     

NIPA类共聚温敏水凝胶中水的状态和耐热性

用N-异丙基丙烯酰胺（NIPA）与丙烯酸钠（SA）及甲基丙烯酸钠（SMA）共聚合成了两个系列的水凝胶，研究了共聚组成与水凝胶基本性质的关系，并用示差扫描量热法（DSC）和热失重法（TG）研究了此类水凝胶中水的状态和耐热性。     

Authorware制作课件解疑及操作技巧

介绍了Authorware软件使用过程中的一些常见问题并给出了具体的解决方案 ;说明了在Au thorware软件使用过程中如何利用一些操作技巧     

关于浮力场概念的引入及其P的力能二重性

在一个均匀且连续充满整个空间的静止液体中引入伴随重力场而存在的浮力场概念,通过它的场力做功揭示其P的力能二重性,进而把浮力场概念推广到液体(理想)的稳定流场中,并以新的观点和方法推导出液体(理想)作稳定流动的一系列重要定理、定律.对于进一步认识浮力本质及其应用有着重要意义.