锭子弹性管的刚度计算及其对动态性能的影响

首先推导了纺纱锭子中开螺旋槽弹性管的等效抗弯刚度及底部刚度系数的计算公式，分析了弹性管各参数对其刚度及振动性能的影响，并进行了模态测试，实验值与计算值基本一致。     

层板复合材料疲劳性能测试实验

根据层板复合材料的性能与具体的铺层形式有关的特点 ,介绍了在层板复合材料疲劳性能测试中试件准备注意事项、疲劳性能测试的内容和实验控制程序的要求 ,以及为缩短实验时间、优化层板复合材料疲劳剩余强度和疲劳剩余刚度分析模型的参数估计 ,并减少测试所需试件数量的合理试件数的确定方法 .     

半环式传感型骨外固定器的力学特性实验

通过对尸胫骨 -传感器骨外固定器系统的动、静刚度及应力遮挡率进行了实验研究 ,表明半环四针传感型骨外固定器较两针型的刚度大 ,因此在骨愈合初期、粉碎性骨折宜采用四针结构 ,以避免错位、成角 ;愈合中后期用两针结构 ,以减小应力遮挡     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

钢筋混凝土框架抗震模型分析

介绍了分离式、组合式、整体式3种钢筋混凝土有限元模型，通过对整体式模型的详细分析，推导出适舍该模型的线性单元矩阵，并得出一些工程中有用的结论。     

盾构隧道围岩与衬砌协同作用纵向位移计算法

盾构机掘进过程中,千斤顶顶进力的不均匀引起的纵向位移是管片间初始错台的主要原因之一;基于Timoshenko梁理论的隧道纵向位移计算方法,未能考虑隧道开挖后围岩卸载破坏的变形特征及围岩与衬砌结构的协同作用效应,预测误差较大。建立了考虑围岩卸载扩容效应的等效地基抗力系数计算方法,提出了能考虑螺栓个数的等效抗剪刚度计算公式,建立一种基于Timoshenko梁理论的改进管片拼装式隧道纵向位移理论计算方法。实际工程案例分析表明：考虑围岩开挖卸载过程中围岩的非线性体积相关塑性变形（即扩容效应）更合理;考虑壁后注浆液固化过程的时效性,采用改进的滑移边界条件计算的纵向位移最大值是传统的固定端边界的计算值的2.3倍,边界条件对计算结果影响较大,本文计算方法更符合实际情况,也更安全。     

非对称渐开线圆柱齿轮的动力学特性

通过对非对称渐开线圆柱齿轮传动的啮合特性分析,建立了齿轮动力学模型,并利用数值积分和数值仿真方法对其进行了非线性振动研究.针对齿轮传动的时变刚度特点,比较了标准齿轮与非对称齿轮的振动特性.结果表明:在同等工况下,非对称齿轮比标准齿轮具有更良好的动力学特性.     

橡胶隔震支座疲劳试验研究

利用自行建立的疲劳试验系统，以国产Ф160mm橡胶隔震支座为研究对象，测试了支座在竖向10万次循环荷载作用下竖向变形和竖向刚度的变化，以确定支座的耐久性性能，结果表明：国产橡胶隔震支座疲劳性能稳定，符合规范规定的性能要求．     

碳纳米管的抗弯刚度

通过对单壁碳纳米管的独特结构的仔细分析，运用分子力学方法，得到了单壁碳纳米管抗弯刚度的计算公式，其结果与目前公认的单壁碳纳米管的有效抗弯刚度吻合得很好．基于单壁碳纳米管的分析结果，提出了一种新的计算多壁碳纳米管抗弯刚度的方法，并推导了多壁碳纳米管的抗弯刚度公式．该公式能在极限条件下很好的还原为经典弹性力学中的抗弯刚度公式，并清楚地反映单壁碳纳米管抗弯刚度不能由经典弹性力学抗弯刚度公式计算的本质原因．结果很好地解释了多壁碳纳米管的屈曲波长与经典预言偏差很大的现象．